Interpreter (computing)

In computer science, an interpreter is a computer program that directly executes instructions written in a programming or scripting language, without requiring them previously to have been compiled into a machine language program. An interpreter generally uses one of the following strategies for program execution:

1. Parse the source code and perform its behavior directly;
2. Translate source code into some efficient intermediate representation or object code and immediately execute that;
3. Explicitly execute stored precompiled bytecode made by a compiler and matched with the interpreter's virtual machine.

W3sDesign Interpreter Design Pattern UML

Early versions of Lisp programming language and minicomputer and microcomputer BASIC dialects would be examples of the first type. Perl, Raku, Python, MATLAB, and Ruby are examples of the second, while UCSD Pascal is an example of the third type. Source programs are compiled ahead of time and stored as machine independent code, which is then linked at run-time and executed by an interpreter and/or compiler (for JIT systems). Some systems, such as Smalltalk and contemporary versions of BASIC and Java, may also combine two and three types. Interpreters of various types have also been constructed for many languages traditionally associated with compilation, such as Algol, Fortran, Cobol, C and C++.

While interpretation and compilation are the two main means by which programming languages are implemented, they are not mutually exclusive, as most interpreting systems also perform some translation work, just like compilers. The terms "interpreted language" or "compiled language" signify that the canonical implementation of that language is an interpreter or a compiler, respectively. A high-level language is ideally an abstraction independent of particular implementations.

History

Interpreters were used as early as 1952 to ease programming within the limitations of computers at the time (e.g. a shortage of program storage space, or no native support for floating point numbers). Interpreters were also used to translate between low-level machine languages, allowing code to be written for machines that were still under construction and tested on computers that already existed. The first interpreted high-level language was Lisp. Lisp was first implemented by Steve Russell on an IBM 704 computer. Russell had read John McCarthy's paper, "Recursive Functions of Symbolic Expressions and Their Computation by Machine, Part I", and realized (to McCarthy's surprise) that the Lisp eval function could be implemented in machine code. The result was a working Lisp interpreter which could be used to run Lisp programs, or more properly, "evaluate Lisp expressions".

The development of editing interpreters was influenced by the need for interactive computing. In the 1960s, the introduction of time-sharing systems allowed multiple users to access a computer simultaneously, and editing interpreters became essential for managing and modifying code in real-time. The first editing interpreters were likely developed for mainframe computers, where they were used to create and modify programs on the fly. One of the earliest examples of an editing interpreter is the EDT (Editor and Debugger for the TECO) system, which was developed in the late 1960s for the PDP-1 computer. EDT allowed users to edit and debug programs using a combination of commands and macros, paving the way for modern text editors and interactive development environments.

General operation

An interpreter usually consists of a set of known commands it can execute, and a list of these commands in the order a programmer wishes to execute them. Each command (also known as an Instruction) contains the data the programmer wants to mutate, and information on how to mutate the data. For example, an interpreter might read ADD Books, 5 and interpret it as a request to add five to the Books variable.

Interpreters have a wide variety of instructions which are specialized to perform different tasks, but you will commonly find interpreter instructions for basic mathematical operations, branching, and memory management, making most interpreters Turing complete. Many interpreters are also closely integrated with a garbage collector and debugger.

Compilers versus interpreters

An illustration of the linking process. Object files and static libraries are assembled into a new library or executable.

Programs written in a high-level language are either directly executed by some kind of interpreter or converted into machine code by a compiler (and assembler and linker) for the CPU to execute.

While compilers (and assemblers) generally produce machine code directly executable by computer hardware, they can often (optionally) produce an intermediate form called object code. This is basically the same machine specific code but augmented with a symbol table with names and tags to make executable blocks (or modules) identifiable and relocatable. Compiled programs will typically use building blocks (functions) kept in a library of such object code modules. A linker is used to combine (pre-made) library files with the object file(s) of the application to form a single executable file. The object files that are used to generate an executable file are thus often produced at different times, and sometimes even by different languages (capable of generating the same object format).

A simple interpreter written in a low-level language (e.g. assembly) may have similar machine code blocks implementing functions of the high-level language stored, and executed when a function's entry in a look up table points to that code. However, an interpreter written in a high-level language typically uses another approach, such as generating and then walking a parse tree, or by generating and executing intermediate software-defined instructions, or both.

Thus, both compilers and interpreters generally turn source code (text files) into tokens, both may (or may not) generate a parse tree, and both may generate immediate instructions (for a stack machine, quadruple code, or by other means). The basic difference is that a compiler system, including a (built in or separate) linker, generates a stand-alone machine code program, while an interpreter system instead performs the actions described by the high-level program.

A compiler can thus make almost all the conversions from source code semantics to the machine level once and for all (i.e. until the program has to be changed) while an interpreter has to do some of this conversion work every time a statement or function is executed. However, in an efficient interpreter, much of the translation work (including analysis of types, and similar) is factored out and done only the first time a program, module, function, or even statement, is run, thus quite akin to how a compiler works. However, a compiled program still runs much faster, under most circumstances, in part because compilers are designed to optimize code, and may be given ample time for this. This is especially true for simpler high-level languages without (many) dynamic data structures, checks, or type checking.

In traditional compilation, the executable output of the linkers (.exe files or .dll files or a library, see picture) is typically relocatable when run under a general operating system, much like the object code modules are but with the difference that this relocation is done dynamically at run time, i.e. when the program is loaded for execution. On the other hand, compiled and linked programs for small embedded systems are typically statically allocated, often hard coded in a NOR flash memory, as there is often no secondary storage and no operating system in this sense.

Historically, most interpreter systems have had a self-contained editor built in. This is becoming more common also for compilers (then often called an IDE), although some programmers prefer to use an editor of their choice and run the compiler, linker and other tools manually. Historically, compilers predate interpreters because hardware at that time could not support both the interpreter and interpreted code and the typical batch environment of the time limited the advantages of interpretation.

Development cycle

During the software development cycle, programmers make frequent changes to source code. When using a compiler, each time a change is made to the source code, they must wait for the compiler to translate the altered source files and link all of the binary code files together before the program can be executed. The larger the program, the longer the wait. By contrast, a programmer using an interpreter does a lot less waiting, as the interpreter usually just needs to translate the code being worked on to an intermediate representation (or not translate it at all), thus requiring much less time before the changes can be tested. Effects are evident upon saving the source code and reloading the program. Compiled code is generally less readily debugged as editing, compiling, and linking are sequential processes that have to be conducted in the proper sequence with a proper set of commands. For this reason, many compilers also have an executive aid, known as a Makefile and program. The Makefile lists compiler and linker command lines and program source code files, but might take a simple command line menu input (e.g. "Make 3") which selects the third group (set) of instructions then issues the commands to the compiler, and linker feeding the specified source code files.

Distribution

A compiler converts source code into binary instruction for a specific processor's architecture, thus making it less portable. This conversion is made just once, on the developer's environment, and after that the same binary can be distributed to the user's machines where it can be executed without further translation. A cross compiler can generate binary code for the user machine even if it has a different processor than the machine where the code is compiled.

An interpreted program can be distributed as source code. It needs to be translated in each final machine, which takes more time but makes the program distribution independent of the machine's architecture. However, the portability of interpreted source code is dependent on the _target machine actually having a suitable interpreter. If the interpreter needs to be supplied along with the source, the overall installation process is more complex than delivery of a monolithic executable, since the interpreter itself is part of what needs to be installed.

The fact that interpreted code can easily be read and copied by humans can be of concern from the point of view of copyright. However, various systems of encryption and obfuscation exist. Delivery of intermediate code, such as bytecode, has a similar effect to obfuscation, but bytecode could be decoded with a decompiler or disassembler.

Efficiency

The main disadvantage of interpreters is that an interpreted program typically runs more slowly than if it had been compiled. The difference in speeds could be tiny or great; often an order of magnitude and sometimes more. It generally takes longer to run a program under an interpreter than to run the compiled code but it can take less time to interpret it than the total time required to compile and run it. This is especially important when prototyping and testing code when an edit-interpret-debug cycle can often be much shorter than an edit-compile-run-debug cycle.

Interpreting code is slower than running the compiled code because the interpreter must analyze each statement in the program each time it is executed and then perform the desired action, whereas the compiled code just performs the action within a fixed context determined by the compilation. This run-time analysis is known as "interpretive overhead". Access to variables is also slower in an interpreter because the mapping of identifiers to storage locations must be done repeatedly at run-time rather than at compile time.

There are various compromises between the development speed when using an interpreter and the execution speed when using a compiler. Some systems (such as some Lisps) allow interpreted and compiled code to call each other and to share variables. This means that once a routine has been tested and debugged under the interpreter it can be compiled and thus benefit from faster execution while other routines are being developed. Many interpreters do not execute the source code as it stands but convert it into some more compact internal form. Many BASIC interpreters replace keywords with single byte tokens which can be used to find the instruction in a jump table. A few interpreters, such as the PBASIC interpreter, achieve even higher levels of program compaction by using a bit-oriented rather than a byte-oriented program memory structure, where commands tokens occupy perhaps 5 bits, nominally "16-bit" constants are stored in a variable-length code requiring 3, 6, 10, or 18 bits, and address operands include a "bit offset". Many BASIC interpreters can store and read back their own tokenized internal representation.

Toy C expression interpreter

// data types for abstract syntax tree enum _kind { kVar, kConst, kSum, kDiff, kMult, kDiv, kPlus, kMinus, kNot }; struct _variable { int *memory; }; struct _constant { int value; }; struct _unaryOperation { struct _node *right; }; struct _binaryOperation { struct _node *left, *right; }; struct _node { enum _kind kind; union _expression { struct _variable variable; struct _constant constant; struct _binaryOperation binary; struct _unaryOperation unary; } e; }; // interpreter procedure int executeIntExpression(const struct _node *n) { int leftValue, rightValue; switch (n->kind) { case kVar: return *n->e.variable.memory; case kConst: return n->e.constant.value; case kSum: case kDiff: case kMult: case kDiv: leftValue = executeIntExpression(n->e.binary.left); rightValue = executeIntExpression(n->e.binary.right); switch (n->kind) { case kSum: return leftValue + rightValue; case kDiff: return leftValue - rightValue; case kMult: return leftValue * rightValue; case kDiv: if (rightValue == 0) exception("division by zero"); // doesn't return return leftValue / rightValue; } case kPlus: case kMinus: case kNot: rightValue = executeIntExpression(n->e.unary.right); switch (n->kind) { case kPlus: return + rightValue; case kMinus: return - rightValue; case kNot: return ! rightValue; } default: exception("internal error: illegal expression kind"); } }

An interpreter might well use the same lexical analyzer and parser as the compiler and then interpret the resulting abstract syntax tree. Example data type definitions for the latter, and a toy interpreter for syntax trees obtained from C expressions are shown in the box.

Regression

Interpretation cannot be used as the sole method of execution: even though an interpreter can itself be interpreted and so on, a directly executed program is needed somewhere at the bottom of the stack because the code being interpreted is not, by definition, the same as the machine code that the CPU can execute.

Variations

Bytecode interpreters

Main article: Bytecode

There is a spectrum of possibilities between interpreting and compiling, depending on the amount of analysis performed before the program is executed. For example, Emacs Lisp is compiled to bytecode, which is a highly compressed and optimized representation of the Lisp source, but is not machine code (and therefore not tied to any particular hardware). This "compiled" code is then interpreted by a bytecode interpreter (itself written in C). The compiled code in this case is machine code for a virtual machine, which is implemented not in hardware, but in the bytecode interpreter. Such compiling interpreters are sometimes also called compreters. In a bytecode interpreter each instruction starts with a byte, and therefore bytecode interpreters have up to 256 instructions, although not all may be used. Some bytecodes may take multiple bytes, and may be arbitrarily complicated.

Control tables - that do not necessarily ever need to pass through a compiling phase - dictate appropriate algorithmic control flow via customized interpreters in similar fashion to bytecode interpreters.

Threaded code interpreters

Main article: Threaded code

Threaded code interpreters are similar to bytecode interpreters but instead of bytes they use pointers. Each "instruction" is a word that points to a function or an instruction sequence, possibly followed by a parameter. The threaded code interpreter either loops fetching instructions and calling the functions they point to, or fetches the first instruction and jumps to it, and every instruction sequence ends with a fetch and jump to the next instruction. Unlike bytecode there is no effective limit on the number of different instructions other than available memory and address space. The classic example of threaded code is the Forth code used in Open Firmware systems: the source language is compiled into "F code" (a bytecode), which is then interpreted by a virtual machine.

Abstract syntax tree interpreters

Main article: Abstract syntax tree

In the spectrum between interpreting and compiling, another approach is to transform the source code into an optimized abstract syntax tree (AST), then execute the program following this tree structure, or use it to generate native code just-in-time. In this approach, each sentence needs to be parsed just once. As an advantage over bytecode, the AST keeps the global program structure and relations between statements (which is lost in a bytecode representation), and when compressed provides a more compact representation. Thus, using AST has been proposed as a better intermediate format for just-in-time compilers than bytecode. Also, it allows the system to perform better analysis during runtime.

However, for interpreters, an AST causes more overhead than a bytecode interpreter, because of nodes related to syntax performing no useful work, of a less sequential representation (requiring traversal of more pointers) and of overhead visiting the tree.

Just-in-time compilation

Main article: Just-in-time compilation

Further blurring the distinction between interpreters, bytecode interpreters and compilation is just-in-time (JIT) compilation, a technique in which the intermediate representation is compiled to native machine code at runtime. This confers the efficiency of running native code, at the cost of startup time and increased memory use when the bytecode or AST is first compiled. The earliest published JIT compiler is generally attributed to work on LISP by John McCarthy in 1960. Adaptive optimization is a complementary technique in which the interpreter profiles the running program and compiles its most frequently executed parts into native code. The latter technique is a few decades old, appearing in languages such as Smalltalk in the 1980s.

Just-in-time compilation has gained mainstream attention amongst language implementers in recent years, with Java, the .NET Framework, most modern JavaScript implementations, and Matlab now including JIT compilers.

Template Interpreter

Making the distinction between compilers and interpreters yet again even more vague is a special interpreter design known as a template interpreter. Rather than implement the execution of code by virtue of a large switch statement containing every possible bytecode, while operating on a software stack or a tree walk, a template interpreter maintains a large array of bytecode (or any efficient intermediate representation) mapped directly to corresponding native machine instructions that can be executed on the host hardware as key value pairs (or in more efficient designs, direct addresses to the native instructions), known as a "Template". When the particular code segment is executed the interpreter simply loads or jumps to the opcode mapping in the template and directly runs it on the hardware. Due to its design, the template interpreter very strongly resembles a just-in-time compiler rather than a traditional interpreter, however it is technically not a JIT due to the fact that it merely translates code from the language into native calls one opcode at a time rather than creating optimized sequences of CPU executable instructions from the entire code segment. Due to the interpreter's simple design of simply passing calls directly to the hardware rather than implementing them directly, it is much faster than every other type, even bytecode interpreters, and to an extent less prone to bugs, but as a tradeoff is more difficult to maintain due to the interpreter having to support translation to multiple different architectures instead of a platform independent virtual machine/stack. To date, the only template interpreter implementations of widely known languages to exist are the interpreter within Java's official reference implementation, the Sun HotSpot Java Virtual Machine, and the Ignition Interpreter in the Google V8 javascript execution engine.

Self-interpreter

Main article: Meta-circular evaluator

A self-interpreter is a programming language interpreter written in a programming language which can interpret itself; an example is a BASIC interpreter written in BASIC. Self-interpreters are related to self-hosting compilers.

If no compiler exists for the language to be interpreted, creating a self-interpreter requires the implementation of the language in a host language (which may be another programming language or assembler). By having a first interpreter such as this, the system is bootstrapped and new versions of the interpreter can be developed in the language itself. It was in this way that Donald Knuth developed the TANGLE interpreter for the language WEB of the de-facto standard TeX typesetting system.

Defining a computer language is usually done in relation to an abstract machine (so-called operational semantics) or as a mathematical function (denotational semantics). A language may also be defined by an interpreter in which the semantics of the host language is given. The definition of a language by a self-interpreter is not well-founded (it cannot define a language), but a self-interpreter tells a reader about the expressiveness and elegance of a language. It also enables the interpreter to interpret its source code, the first step towards reflective interpreting.

An important design dimension in the implementation of a self-interpreter is whether a feature of the interpreted language is implemented with the same feature in the interpreter's host language. An example is whether a closure in a Lisp-like language is implemented using closures in the interpreter language or implemented "manually" with a data structure explicitly storing the environment. The more features implemented by the same feature in the host language, the less control the programmer of the interpreter has; for example, a different behavior for dealing with number overflows cannot be realized if the arithmetic operations are delegated to corresponding operations in the host language.

Some languages such as Lisp and Prolog have elegant self-interpreters. Much research on self-interpreters (particularly reflective interpreters) has been conducted in the Scheme programming language, a dialect of Lisp. In general, however, any Turing-complete language allows writing of its own interpreter. Lisp is such a language, because Lisp programs are lists of symbols and other lists. XSLT is such a language, because XSLT programs are written in XML. A sub-domain of metaprogramming is the writing of domain-specific languages (DSLs).

Clive Gifford introduced a measure quality of self-interpreter (the eigenratio), the limit of the ratio between computer time spent running a stack of N self-interpreters and time spent to run a stack of N − 1 self-interpreters as N goes to infinity. This value does not depend on the program being run.

The book Structure and Interpretation of Computer Programs presents examples of meta-circular interpretation for Scheme and its dialects. Other examples of languages with a self-interpreter are Forth and Pascal.

Microcode

Main article: Microcode

Microcode is a very commonly used technique "that imposes an interpreter between the hardware and the architectural level of a computer". As such, the microcode is a layer of hardware-level instructions that implement higher-level machine code instructions or internal state machine sequencing in many digital processing elements. Microcode is used in general-purpose central processing units, as well as in more specialized processors such as microcontrollers, digital signal processors, channel controllers, disk controllers, network interface controllers, network processors, graphics processing units, and in other hardware.

Microcode typically resides in special high-speed memory and translates machine instructions, state machine data or other input into sequences of detailed circuit-level operations. It separates the machine instructions from the underlying electronics so that instructions can be designed and altered more freely. It also facilitates the building of complex multi-step instructions, while reducing the complexity of computer circuits. Writing microcode is often called microprogramming and the microcode in a particular processor implementation is sometimes called a microprogram.

More extensive microcoding allows small and simple microarchitectures to emulate more powerful architectures with wider word length, more execution units and so on, which is a relatively simple way to achieve software compatibility between different products in a processor family.

Computer processor

Even a non microcoding computer processor itself can be considered to be a parsing immediate execution interpreter that is written in a general purpose hardware description language such as VHDL to create a system that parses the machine code instructions and immediately executes them.

Understanding Interpreter Performance

Interpreters, such as those written in Java, Perl, and Tcl, are now necessary for a wide range of computational tasks, including binary emulation and internet applications. Interpreter performance is still a worry despite their adaptability, particularly on systems with limited hardware resources. Advanced instrumentation and tracing approaches provide insights into interpreter implementations and processor resource utilization during execution through evaluations of interpreters tailored for the MIPS instruction set and programming languages such as Tcl, Perl, and Java. Performance characteristics are influenced by interpreter complexity, as demonstrated by comparisons with compiled code. It is clear that interpreter performance is more dependent on the nuances and resource needs of the interpreter than it is on the particular application that is being interpreted.

Applications

• Interpreters are frequently used to execute command languages, and glue languages since each operator executed in command language is usually an invocation of a complex routine such as an editor or compiler.
• Self-modifying code can easily be implemented in an interpreted language. This relates to the origins of interpretation in Lisp and artificial intelligence research.
• Virtualization. Machine code intended for a hardware architecture can be run using a virtual machine. This is often used when the intended architecture is unavailable, or among other uses, for running multiple copies.
• Sandboxing: While some types of sandboxes rely on operating system protections, an interpreter or virtual machine is often used. The actual hardware architecture and the originally intended hardware architecture may or may not be the same. This may seem pointless, except that sandboxes are not compelled to actually execute all the instructions the source code it is processing. In particular, it can refuse to execute code that violates any security constraints it is operating under.
• Emulators for running computer software written for obsolete and unavailable hardware on more modern equipment.

See also

• BASIC interpreter
• Command-line interpreter
• Compiled language
• Dynamic compilation
• Homoiconicity
• Meta-circular evaluator
• Partial evaluation
• Read–eval–print loop

Sources

• Aycock, J. (June 2003). "A brief history of just-in-time". ACM Computing Surveys. 35 (2): 97–113. CiteSeerX 10.1.1.97.3985. doi:10.1145/857076.857077. S2CID 15345671.

External links

• IBM Card Interpreters page at Columbia University
• Theoretical Foundations For Practical 'Totally Functional Programming' (Chapter 7 especially) Doctoral dissertation tackling the problem of formalising what is an interpreter
• Short animation explaining the key conceptual difference between interpreters and compilers. Archived at ghostarchive.org on May 9, 2022.