Wikipedia

Polymetallic replacement deposit

(Redirected from Manto ore deposits)
"Mantos" redirects here. For other uses, see Manto.

A polymetallic replacement deposit, also known as carbonate replacement deposit or high-temperature carbonate-hosted Ag-Pb-Zn deposit,[2] is an orebody of metallic minerals formed by the replacement of sedimentary, usually carbonate rock, by metal-bearing solutions in the vicinity of igneous intrusions.[3] When the ore forms a blanketlike body along the bedding plane of the rock, it is commonly called a manto ore deposit. Other ore geometries are chimneys and veins.[4] Polymetallic replacements/mantos are often stratiform wall-rock replacement orebodies distal to porphyry copper deposits,[5] or porphyry molybdenum deposits.[6] The term manto is derived from the Spanish word manto, meaning "mantle" or "cloak".

Cartoon cross-section showing manto ore deposits (USGS)[1]

Although similar in orebody geometry, host-rock lithology, and the presence of lead and zinc, carbonate hosted lead zinc ore deposits, also known as Mississippi Valley type, are considered a different type of ore deposits. Mississippi valley type ore deposits lack silver and gold mineralization, are lower temperature, and are not associated with nearby igneous intrusions.

Mineralogy

edit

Polymetallic replacement deposits are significant sources of copper,[7] gold, silver, lead, manganese, and zinc.

The metallic ore minerals are mostly in sulfides, such as galena, sphalerite, enargite, and argentite. Gangue minerals include quartz, pyrite, rhodochrosite and barite.

The mineralogy changes with distance from the intrusive rock. Closest to the intrusion is the copper-gold zone; next is the lead-silver zone, then the zinc-manganese zone.[8]

Classification

edit

Manto ore deposits are defined by a strict stratigraphic control on their distribution, generally within a porous formation within a structural trap site.[citation needed] They are distinct from other copper ore bodies in that they are not associated with shear zones, and an intrusive link to manto deposit formation is not conclusively proven,[citation needed] but is often inferred.

Genetic model

edit

The genetic model of manto formation is debated, but consists of the following broad principles;

  • The source of ore within manto deposits is considered to be interformational, from a sedimentary source within an adjacent sedimentary basin, or from ore fluids driven off from a granite intrusive.[citation needed]
  • The transport of copper into the manto deposit position was likely hydrothermal, either a metamorphic solution or copper-bearing hydrothermal solutions generated by intrusive granites.[citation needed]
  • The trap where the ore materials concentrated is typically a coarse-grained member of a carbonate formation, and the manto is usually sited in a stratigraphic or structural pinch-out of this formation although it is now thought that hydrocarbons may have assisted in the migration of metals into favorable trap sites.[citation needed]

Morphology

edit

Manto deposits were first described in great detail in Chile, where they sit within sedimentary strata overlying large granitic intrusions, in regions adjacent to porphyry copper deposits.[citation needed]

In Chile, the arid climate and deep regolith development, tended to favor preservation of chalcocite-malachite-azurite assemblages in the manto deposits, leading workers to believe that they were weathered equivalents of primary chalcopyrite deposits of porphyry-copper derivation. [citation needed]

However, recent work suggests that there may be primary chalcocite and bornite formed within degraded petroleum within trap sites, with copper precipitating from solution by reduction in contact with the reduced carbon.[9] Thus, manto deposits need not be the weathered equivalents of primary chalcopyrite.

Manto deposits may be formed in proximity to intrusives, for instance in the La Providencia mine, Mexico, a porphyry stock is the feeder for some twenty mantos as the pipe intersects favorable layers in the sedimentary sequence. However, these manto deposits are analogous to skarn deposits, and in some cases terminology may be misused.[citation needed]

In many instances, manto/ polymetallic replacement/ carbonate replacement deposits can be considered as the distal part of a continuum with skarn deposits.[2][6]

Example manto deposits

edit

See also

edit

References

edit
  1. ^ Plumlee, Geoffrey S., Maria Montour, Cliff D. Taylor, Alan R. Wallace, and Douglas P. Klein, Polymetallic vein and replacement deposits, 1995, US Geological Survey, Open-File Report OFR-95-0831, Chapter 14.
  2. ^ a b Megaw, P.K.M., Ruiz, J., and Titley, S.R., 1988, High-Temperature, Carbonate-Hosted Ag-Pb-Zn(Cu) Deposits of Northern Mexico: Economic Geology, v. 83, pp.1856-1885
  3. ^ Hal T. Morris, 1986, "Polymetallic replacement deposits," in Dennis P. Cox and Donald A. Singer, Mineral Deposit Models, US Geological Survey, Bulletin 1693, p.99-100.
  4. ^ Guilbert, John M. and Charles F. Park, Jr (1986) The Geology of Ore Deposits, W. H. Freeman pp. 77-79 ISBN 0-7167-1456-6
  5. ^ Sillitoe, Richard H. "Porphyry copper systems." Economic Geology 105.1 (2010): 3-41.
  6. ^ a b Ray, G., Webster, I., Megaw, P., McGlasson, J., and Glover, K., 2001, The Lustdust Property in Central British Columbia: A Polymetallic Zoned Porphyry-Skarn-Manto-Vein System: British Columbia Geological Survey Geological Fieldwork 2001, p. 257-280
  7. ^ Loader, S. E. "Supergene Enrichment of the Khanong Copper Resource, Sepon Project, Lao PDR." Pacrim'99 Congress: 10–13 October 1999, Bali, Indonesia. Australasian Institute of Mining and Metallurgy, 1999.
  8. ^ Hal T. Morris, 1986, "Polymetallic replacement deposits," in Dennis P. Cox and Donald A. Singer, Mineral Deposit Models, US Geological Survey, Bulletin 1693, p.99-100.
  9. ^ Wilson N.S.F., & Zentilli M., 2006. Association of pyrobitumen with copper mineralization from the Uchumi and Talcuna districts, Chile. Journal of Coal Geology, 65, pp 158-165.
  10. ^ Dan L. Mosier, Hal T. Morris, and Donald A. Singer, 1986, "Grade and tonnage models of polymetallic replacement deposits," in Dennis P. Cox and Donald A. Singer, Mineral Deposit Models, US Geological Survey, Bulletin 1693, p.101-104.

Literature

edit
  • Evans, Anthony, (1992) Ore Geology and Industrial Minerals: An Introduction, Blackwell Science; 3rd edition ISBN 0-632-02953-6
  • Guilbert, John M. and Charles F. Park, Jr (1986) The Geology of Ore Deposits, W. H. Freeman ISBN 0-7167-1456-6
Retrieved from "https://en.wikipedia.org/w/index.php?title=Polymetallic_replacement_deposit&oldid=1250098949"
  NODES
Association 1
Note 1
Project 1