A glacier (US: /ˈɡlʃər/; UK: /ˈɡlæsiər, ˈɡlsiər/) is a persistent body of dense ice that is constantly moving downhill under its own weight. A glacier forms where the accumulation of snow exceeds its ablation over many years, often centuries. It acquires distinguishing features, such as crevasses and seracs, as it slowly flows and deforms under stresses induced by its weight. As it moves, it abrades rock and debris from its substrate to create landforms such as cirques, moraines, or fjords. Although a glacier may flow into a body of water, it forms only on land and is distinct from the much thinner sea ice and lake ice that form on the surface of bodies of water.

Glacier of the Geikie Plateau in Greenland.
The Taschachferner in the Ötztal Alps in Austria. The mountain to the left is the Wildspitze (3.768 m), second highest in Austria.
With 7,253 known glaciers, Pakistan contains more glacial ice than any other country on earth outside the polar regions.[1] At 62 kilometres (39 mi) in length, the pictured Baltoro Glacier is one of the world's longest alpine glaciers.

On Earth, 99% of glacial ice is contained within vast ice sheets (also known as "continental glaciers") in the polar regions, but glaciers may be found in mountain ranges on every continent other than the Australian mainland, including Oceania's high-latitude oceanic island countries such as New Zealand. Between latitudes 35°N and 35°S, glaciers occur only in the Himalayas, Andes, and a few high mountains in East Africa, Mexico, New Guinea and on Zard-Kuh in Iran.[2] With more than 7,000 known glaciers, Pakistan has more glacial ice than any other country outside the polar regions.[3][1] Glaciers cover about 10% of Earth's land surface. Continental glaciers cover nearly 13 million km2 (5 million sq mi) or about 98% of Antarctica's 13.2 million km2 (5.1 million sq mi), with an average thickness of ice 2,100 m (7,000 ft). Greenland and Patagonia also have huge expanses of continental glaciers.[4] The volume of glaciers, not including the ice sheets of Antarctica and Greenland, has been estimated at 170,000 km3.[5]

Glacial ice is the largest reservoir of fresh water on Earth, holding with ice sheets about 69 percent of the world's freshwater.[6][7] Many glaciers from temperate, alpine and seasonal polar climates store water as ice during the colder seasons and release it later in the form of meltwater as warmer summer temperatures cause the glacier to melt, creating a water source that is especially important for plants, animals and human uses when other sources may be scant. However, within high-altitude and Antarctic environments, the seasonal temperature difference is often not sufficient to release meltwater.

Since glacial mass is affected by long-term climatic changes, e.g., precipitation, mean temperature, and cloud cover, glacial mass changes are considered among the most sensitive indicators of climate change and are a major source of variations in sea level.

A large piece of compressed ice, or a glacier, appears blue, as large quantities of water appear blue, because water molecules absorb other colors more efficiently than blue. The other reason for the blue color of glaciers is the lack of air bubbles. Air bubbles, which give a white color to ice, are squeezed out by pressure increasing the created ice's density.

edit

The word glacier is a loanword from French and goes back, via Franco-Provençal, to the Vulgar Latin glaciārium, derived from the Late Latin glacia, and ultimately Latin glaciēs, meaning "ice".[8] The processes and features caused by or related to glaciers are referred to as glacial. The process of glacier establishment, growth and flow is called glaciation. The corresponding area of study is called glaciology. Glaciers are important components of the global cryosphere.

Types

edit

Classification by size, shape and behavior

edit
 
The Quelccaya Ice Cap in Peru is the second-largest glaciated area in the tropics

Glaciers are categorized by their morphology, thermal characteristics, and behavior. Alpine glaciers form on the crests and slopes of mountains. A glacier that fills a valley is called a valley glacier, or alternatively, an alpine glacier or mountain glacier.[9] A large body of glacial ice astride a mountain, mountain range, or volcano is termed an ice cap or ice field.[10] Ice caps have an area less than 50,000 km2 (19,000 sq mi) by definition.

Glacial bodies larger than 50,000 km2 (19,000 sq mi) are called ice sheets or continental glaciers.[11] Several kilometers deep, they obscure the underlying topography. Only nunataks protrude from their surfaces. The only extant ice sheets are the two that cover most of Antarctica and Greenland.[12] They contain vast quantities of freshwater, enough that if both melted, global sea levels would rise by over 70 m (230 ft).[13] Portions of an ice sheet or cap that extend into water are called ice shelves; they tend to be thin with limited slopes and reduced velocities.[14] Narrow, fast-moving sections of an ice sheet are called ice streams.[15][16] In Antarctica, many ice streams drain into large ice shelves. Some drain directly into the sea, often with an ice tongue, like Mertz Glacier.

Tidewater glaciers are glaciers that terminate in the sea, including most glaciers flowing from Greenland, Antarctica, Baffin, Devon, and Ellesmere Islands in Canada, Southeast Alaska, and the Northern and Southern Patagonian Ice Fields. As the ice reaches the sea, pieces break off or calve, forming icebergs. Most tidewater glaciers calve above sea level, which often results in a tremendous impact as the iceberg strikes the water. Tidewater glaciers undergo centuries-long cycles of advance and retreat that are much less affected by climate change than other glaciers.[17]

Classification by thermal state

edit
 
Webber Glacier on Grant Land is an advancing polar glacier

Thermally, a temperate glacier is at a melting point throughout the year, from its surface to its base. The ice of a polar glacier is always below the freezing threshold from the surface to its base, although the surface snowpack may experience seasonal melting. A subpolar glacier includes both temperate and polar ice, depending on the depth beneath the surface and position along the length of the glacier. In a similar way, the thermal regime of a glacier is often described by its basal temperature. A cold-based glacier is below freezing at the ice-ground interface and is thus frozen to the underlying substrate. A warm-based glacier is above or at freezing at the interface and is able to slide at this contact.[18] This contrast is thought to a large extent to govern the ability of a glacier to effectively erode its bed, as sliding ice promotes plucking at rock from the surface below.[19] Glaciers which are partly cold-based and partly warm-based are known as polythermal.[18]

Formation

edit
 
A glacier cave located on the Perito Moreno Glacier in Argentina

Glaciers form where the accumulation of snow and ice exceeds ablation. A glacier usually originates from a cirque landform (alternatively known as a corrie or as a cwm) – a typically armchair-shaped geological feature (such as a depression between mountains enclosed by arêtes) – which collects and compresses through gravity the snow that falls into it. This snow accumulates and the weight of the snow falling above compacts it, forming névé (granular snow). Further crushing of the individual snowflakes and squeezing the air from the snow turns it into "glacial ice". This glacial ice will fill the cirque until it "overflows" through a geological weakness or vacancy, such as a gap between two mountains. When the mass of snow and ice reaches sufficient thickness, it begins to move by a combination of surface slope, gravity, and pressure. On steeper slopes, this can occur with as little as 15 m (49 ft) of snow-ice.

In temperate glaciers, snow repeatedly freezes and thaws, changing into granular ice called firn. Under the pressure of the layers of ice and snow above it, this granular ice fuses into denser firn. Over a period of years, layers of firn undergo further compaction and become glacial ice.[20] Glacier ice is slightly more dense than ice formed from frozen water because glacier ice contains fewer trapped air bubbles.

Glacial ice has a distinctive blue tint because it absorbs some red light due to an overtone of the infrared OH stretching mode of the water molecule. (Liquid water appears blue for the same reason. The blue of glacier ice is sometimes misattributed to Rayleigh scattering of bubbles in the ice.)[21]

Structure

edit
 
The overhanging icefront of the advancing Webber Glacier with waterfalls (Borup Fiord area, Northern Ellesmere Island) on July 20, 1978. Debris rich layers have been sheared and folded into the basal cold glacier ice. The glacier front is 6 km broad and up to 40 m high

A glacier originates at a location called its glacier head and terminates at its glacier foot, snout, or terminus.

Glaciers are broken into zones based on surface snowpack and melt conditions.[22] The ablation zone is the region where there is a net loss in glacier mass. The upper part of a glacier, where accumulation exceeds ablation, is called the accumulation zone. The equilibrium line separates the ablation zone and the accumulation zone; it is the contour where the amount of new snow gained by accumulation is equal to the amount of ice lost through ablation. In general, the accumulation zone accounts for 60–70% of the glacier's surface area, more if the glacier calves icebergs. Ice in the accumulation zone is deep enough to exert a downward force that erodes underlying rock. After a glacier melts, it often leaves behind a bowl- or amphitheater-shaped depression that ranges in size from large basins like the Great Lakes to smaller mountain depressions known as cirques.

The accumulation zone can be subdivided based on its melt conditions.

  1. The dry snow zone is a region where no melt occurs, even in the summer, and the snowpack remains dry.
  2. The percolation zone is an area with some surface melt, causing meltwater to percolate into the snowpack. This zone is often marked by refrozen ice lenses, glands, and layers. The snowpack also never reaches the melting point.
  3. Near the equilibrium line on some glaciers, a superimposed ice zone develops. This zone is where meltwater refreezes as a cold layer in the glacier, forming a continuous mass of ice.
  4. The wet snow zone is the region where all of the snow deposited since the end of the previous summer has been raised to 0 °C.

The health of a glacier is usually assessed by determining the glacier mass balance or observing terminus behavior. Healthy glaciers have large accumulation zones, more than 60% of their area is snow-covered at the end of the melt season, and they have a terminus with a vigorous flow.

Following the Little Ice Age's end around 1850, glaciers around the Earth have retreated substantially. A slight cooling led to the advance of many alpine glaciers between 1950 and 1985, but since 1985 glacier retreat and mass loss has become larger and increasingly ubiquitous.[23][24][25]

Motion

edit
 
The stress–strain relationship of plastic flow (teal section): a small increase in stress creates an exponentially greater increase in strain, which equates to deformation speed.

Glaciers move downhill by the force of gravity and the internal deformation of ice.[26] At the molecular level, ice consists of stacked layers of molecules with relatively weak bonds between layers. When the amount of strain (deformation) is proportional to the stress being applied, ice will act as an elastic solid. Ice needs to be at least 30 m (98 ft) thick to even start flowing, but once its thickness exceeds about 50 m (160 ft) (160 ft), stress on the layer above will exceeds the inter-layer binding strength, and then it'll move faster than the layer below.[27] This means that small amounts of stress can result in a large amount of strain, causing the deformation to become a plastic flow rather than elastic. Then, the glacier will begin to deform under its own weight and flow across the landscape. According to the Glen–Nye flow law, the relationship between stress and strain, and thus the rate of internal flow, can be modeled as follows:[28][26]

 

where:

  = shear strain (flow) rate
  = stress
  = a constant between 2–4 (typically 3 for most glaciers)
  = a temperature-dependent constant
 
Differential erosion enhances relief, as clear in this incredibly steep-sided Norwegian fjord.

The lowest velocities are near the base of the glacier and along valley sides where friction acts against flow, causing the most deformation. Velocity increases inward toward the center line and upward, as the amount of deformation decreases. The highest flow velocities are found at the surface, representing the sum of the velocities of all the layers below.[28][26]

Because ice can flow faster where it is thicker, the rate of glacier-induced erosion is directly proportional to the thickness of overlying ice. Consequently, pre-glacial low hollows will be deepened and pre-existing topography will be amplified by glacial action, while nunataks, which protrude above ice sheets, barely erode at all – erosion has been estimated as 5 m per 1.2 million years.[29] This explains, for example, the deep profile of fjords, which can reach a kilometer in depth as ice is topographically steered into them. The extension of fjords inland increases the rate of ice sheet thinning since they are the principal conduits for draining ice sheets. It also makes the ice sheets more sensitive to changes in climate and the ocean.[29]

Although evidence in favor of glacial flow was known by the early 19th century, other theories of glacial motion were advanced, such as the idea that meltwater, refreezing inside glaciers, caused the glacier to dilate and extend its length. As it became clear that glaciers behaved to some degree as if the ice were a viscous fluid, it was argued that "regelation", or the melting and refreezing of ice at a temperature lowered by the pressure on the ice inside the glacier, was what allowed the ice to deform and flow. James Forbes came up with the essentially correct explanation in the 1840s, although it was several decades before it was fully accepted.[30]

Fracture zone and cracks

edit
 
Ice cracks in the Titlis Glacier

The top 50 m (160 ft) of a glacier are rigid because they are under low pressure. This upper section is known as the fracture zone and moves mostly as a single unit over the plastic-flowing lower section. When a glacier moves through irregular terrain, cracks called crevasses develop in the fracture zone. Crevasses form because of differences in glacier velocity. If two rigid sections of a glacier move at different speeds or directions, shear forces cause them to break apart, opening a crevasse. Crevasses are seldom more than 46 m (150 ft) deep but, in some cases, can be at least 300 m (1,000 ft) deep. Beneath this point, the plasticity of the ice prevents the formation of cracks. Intersecting crevasses can create isolated peaks in the ice, called seracs.

 
Shear or herring-bone crevasses on Emmons Glacier (Mount Rainier); such crevasses often form near the edge of a glacier where interactions with underlying or marginal rock impede flow. In this case, the impediment appears to be some distance from the near margin of the glacier.

Crevasses can form in several different ways. Transverse crevasses are transverse to flow and form where steeper slopes cause a glacier to accelerate. Longitudinal crevasses form semi-parallel to flow where a glacier expands laterally. Marginal crevasses form near the edge of the glacier, caused by the reduction in speed caused by friction of the valley walls. Marginal crevasses are largely transverse to flow. Moving glacier ice can sometimes separate from the stagnant ice above, forming a bergschrund. Bergschrunds resemble crevasses but are singular features at a glacier's margins. Crevasses make travel over glaciers hazardous, especially when they are hidden by fragile snow bridges.

Below the equilibrium line, glacial meltwater is concentrated in stream channels. Meltwater can pool in proglacial lakes on top of a glacier or descend into the depths of a glacier via moulins. Streams within or beneath a glacier flow in englacial or sub-glacial tunnels. These tunnels sometimes reemerge at the glacier's surface.[31]

Subglacial processes

edit
 
Erosion rates of subglacial sediment caused by the motion of different glaciers across the world [32]

Most of the important processes controlling glacial motion occur in the ice-bed contact—even though it is only a few meters thick.[33] The bed's temperature, roughness and softness define basal shear stress, which in turn defines whether movement of the glacier will be accommodated by motion in the sediments, or if it'll be able to slide. A soft bed, with high porosity and low pore fluid pressure, allows the glacier to move by sediment sliding: the base of the glacier may even remain frozen to the bed, where the underlying sediment slips underneath it like a tube of toothpaste. A hard bed cannot deform in this way; therefore the only way for hard-based glaciers to move is by basal sliding, where meltwater forms between the ice and the bed itself.[34] Whether a bed is hard or soft depends on the porosity and pore pressure; higher porosity decreases the sediment strength (thus increases the shear stress τB).[33]

Porosity may vary through a range of methods.

  • Movement of the overlying glacier may cause the bed to undergo dilatancy; the resulting shape change reorganizes blocks. This reorganizes closely packed blocks (a little like neatly folded, tightly packed clothes in a suitcase) into a messy jumble (just as clothes never fit back in when thrown in in a disordered fashion). This increases the porosity. Unless water is added, this will necessarily reduce the pore pressure (as the pore fluids have more space to occupy).[33]
  • Pressure may cause compaction and consolidation of underlying sediments.[33] Since water is relatively incompressible, this is easier when the pore space is filled with vapor; any water must be removed to permit compression. In soils, this is an irreversible process.[33]
  • Sediment degradation by abrasion and fracture decreases the size of particles, which tends to decrease pore space. However, the motion of the particles may disorder the sediment, with the opposite effect. These processes also generate heat.[33]

Bed softness may vary in space or time, and changes dramatically from glacier to glacier. An important factor is the underlying geology; glacial speeds tend to differ more when they change bedrock than when the gradient changes.[34] Further, bed roughness can also act to slow glacial motion. The roughness of the bed is a measure of how many boulders and obstacles protrude into the overlying ice. Ice flows around these obstacles by melting under the high pressure on their stoss side; the resultant meltwater is then forced into the cavity arising in their lee side, where it re-freezes.[33]

As well as affecting the sediment stress, fluid pressure (pw) can affect the friction between the glacier and the bed. High fluid pressure provides a buoyancy force upwards on the glacier, reducing the friction at its base. The fluid pressure is compared to the ice overburden pressure, pi, given by ρgh. Under fast-flowing ice streams, these two pressures will be approximately equal, with an effective pressure (pi – pw) of 30 kPa; i.e. all of the weight of the ice is supported by the underlying water, and the glacier is afloat.[33]

Basal melting and sliding

edit
 
A cross-section through a glacier. The base of the glacier is more transparent as a result of melting.

Glaciers may also move by basal sliding, where the base of the glacier is lubricated by the presence of liquid water, reducing basal shear stress and allowing the glacier to slide over the terrain on which it sits. Meltwater may be produced by pressure-induced melting, friction or geothermal heat. The more variable the amount of melting at surface of the glacier, the faster the ice will flow. Basal sliding is dominant in temperate or warm-based glaciers.[35]

τD = ρgh sin α
where τD is the driving stress, and α the ice surface slope in radians.[33]
τB is the basal shear stress, a function of bed temperature and softness.[33]
τF, the shear stress, is the lower of τB and τD. It controls the rate of plastic flow.

The presence of basal meltwater depends on both bed temperature and other factors. For instance, the melting point of water decreases under pressure, meaning that water melts at a lower temperature under thicker glaciers.[33] This acts as a "double whammy", because thicker glaciers have a lower heat conductance, meaning that the basal temperature is also likely to be higher.[34] Bed temperature tends to vary in a cyclic fashion. A cool bed has a high strength, reducing the speed of the glacier. This increases the rate of accumulation, since newly fallen snow is not transported away. Consequently, the glacier thickens, with three consequences: firstly, the bed is better insulated, allowing greater retention of geothermal heat.[33]

Secondly, the increased pressure can facilitate melting. Most importantly, τD is increased. These factors will combine to accelerate the glacier. As friction increases with the square of velocity, faster motion will greatly increase frictional heating, with ensuing melting – which causes a positive feedback, increasing ice speed to a faster flow rate still: west Antarctic glaciers are known to reach velocities of up to a kilometer per year.[33] Eventually, the ice will be surging fast enough that it begins to thin, as accumulation cannot keep up with the transport. This thinning will increase the conductive heat loss, slowing the glacier and causing freezing. This freezing will slow the glacier further, often until it is stationary, whence the cycle can begin again.[34]

 
Location and diagram of Lake Vostok, a prominent subglacial lake beneath the East Antarctic Ice Sheet.

The flow of water under the glacial surface can have a large effect on the motion of the glacier itself. Subglacial lakes contain significant amounts of water, which can move fast: cubic kilometers can be transported between lakes over the course of a couple of years.[36] This motion is thought to occur in two main modes: pipe flow involves liquid water moving through pipe-like conduits, like a sub-glacial river; sheet flow involves motion of water in a thin layer. A switch between the two flow conditions may be associated with surging behavior. Indeed, the loss of sub-glacial water supply has been linked with the shut-down of ice movement in the Kamb ice stream.[36] The subglacial motion of water is expressed in the surface topography of ice sheets, which slump down into vacated subglacial lakes.[36]

Speed

edit
 
The formation of supraglacial lakes at Baltoro Glacier in April 2018 (top) had substantially accelerated its melting and motion in the following summer months (bottom)[37]

The speed of glacial displacement is partly determined by friction. Friction makes the ice at the bottom of the glacier move more slowly than ice at the top. In alpine glaciers, friction is also generated at the valley's sidewalls, which slows the edges relative to the center.

Mean glacial speed varies greatly but is typically around 1 m (3 ft) per day.[38] There may be no motion in stagnant areas; for example, in parts of Alaska, trees can establish themselves on surface sediment deposits. In other cases, glaciers can move as fast as 20–30 m (70–100 ft) per day, such as in Greenland's Jakobshavn Isbræ. Glacial speed is affected by factors such as slope, ice thickness, snowfall, longitudinal confinement, basal temperature, meltwater production, and bed hardness.

A few glaciers have periods of very rapid advancement called surges. These glaciers exhibit normal movement until suddenly they accelerate, then return to their previous movement state.[39] These surges may be caused by the failure of the underlying bedrock, the pooling of meltwater at the base of the glacier[40] — perhaps delivered from a supraglacial lake — or the simple accumulation of mass beyond a critical "tipping point".[41] Temporary rates up to 90 m (300 ft) per day have occurred when increased temperature or overlying pressure caused bottom ice to melt and water to accumulate beneath a glacier.

In glaciated areas where the glacier moves faster than one km per year, glacial earthquakes occur. These are large scale earthquakes that have seismic magnitudes as high as 6.1.[42][43] The number of glacial earthquakes in Greenland peaks every year in July, August, and September and increased rapidly in the 1990s and 2000s. In a study using data from January 1993 through October 2005, more events were detected every year since 2002, and twice as many events were recorded in 2005 as there were in any other year.[43]

Ogives

edit
 
Forbes bands on the Mer de Glace glacier in France

Ogives or Forbes bands[44] are alternating wave crests and valleys that appear as dark and light bands of ice on glacier surfaces. They are linked to seasonal motion of glaciers; the width of one dark and one light band generally equals the annual movement of the glacier. Ogives are formed when ice from an icefall is severely broken up, increasing ablation surface area during summer. This creates a swale and space for snow accumulation in the winter, which in turn creates a ridge.[45] Sometimes ogives consist only of undulations or color bands and are described as wave ogives or band ogives.[46]

Geography

edit
 
Fox Glacier in New Zealand finishes near a rainforest

Glaciers are present on every continent and in approximately fifty countries, excluding those (Australia, South Africa) that have glaciers only on distant subantarctic island territories. Extensive glaciers are found in Antarctica, Argentina, Chile, Canada, Pakistan,[47] Alaska, Greenland and Iceland. Mountain glaciers are widespread, especially in the Andes, the Himalayas, the Rocky Mountains, the Caucasus, Scandinavian Mountains, and the Alps. Snezhnika glacier in Pirin Mountain, Bulgaria with a latitude of 41°46′09″ N is the southernmost glacial mass in Europe.[48] Mainland Australia currently contains no glaciers, although a small glacier on Mount Kosciuszko was present in the last glacial period.[49] In New Guinea, small, rapidly diminishing, glaciers are located on Puncak Jaya.[50] Africa has glaciers on Mount Kilimanjaro in Tanzania, on Mount Kenya, and in the Rwenzori Mountains. Oceanic islands with glaciers include Iceland, several of the islands off the coast of Norway including Svalbard and Jan Mayen to the far north, New Zealand and the subantarctic islands of Marion, Heard, Grande Terre (Kerguelen) and Bouvet. During glacial periods of the Quaternary, Taiwan, Hawaii on Mauna Kea[51] and Tenerife also had large alpine glaciers, while the Faroe and Crozet Islands[52] were completely glaciated.

The permanent snow cover necessary for glacier formation is affected by factors such as the degree of slope on the land, amount of snowfall and the winds. Glaciers can be found in all latitudes except from 20° to 27° north and south of the equator where the presence of the descending limb of the Hadley circulation lowers precipitation so much that with high insolation snow lines reach above 6,500 m (21,330 ft). Between 19˚N and 19˚S, however, precipitation is higher, and the mountains above 5,000 m (16,400 ft) usually have permanent snow.

 
Black ice glacier near Aconcagua, Argentina

Even at high latitudes, glacier formation is not inevitable. Areas of the Arctic, such as Banks Island, and the McMurdo Dry Valleys in Antarctica are considered polar deserts where glaciers cannot form because they receive little snowfall despite the bitter cold. Cold air, unlike warm air, is unable to transport much water vapor. Even during glacial periods of the Quaternary, Manchuria, lowland Siberia,[53] and central and northern Alaska,[54] though extraordinarily cold, had such light snowfall that glaciers could not form.[55][56]

In addition to the dry, unglaciated polar regions, some mountains and volcanoes in Bolivia, Chile and Argentina are high (4,500 to 6,900 m or 14,800 to 22,600 ft) and cold, but the relative lack of precipitation prevents snow from accumulating into glaciers. This is because these peaks are located near or in the hyperarid Atacama Desert.

Glacial geology

edit

Erosion

edit
 
Diagram of glacial plucking and abrasion

Glaciers erode terrain through two principal processes: plucking and abrasion.[57]

As glaciers flow over bedrock, they soften and lift blocks of rock into the ice. This process, called plucking, is caused by subglacial water that penetrates fractures in the bedrock and subsequently freezes and expands.[58] This expansion causes the ice to act as a lever that loosens the rock by lifting it. Thus, sediments of all sizes become part of the glacier's load. If a retreating glacier gains enough debris, it may become a rock glacier, like the Timpanogos Glacier in Utah.

Abrasion occurs when the ice and its load of rock fragments slide over bedrock[58] and function as sandpaper, smoothing and polishing the bedrock below. The pulverized rock this process produces is called rock flour and is made up of rock grains between 0.002 and 0.00625 mm in size. Abrasion leads to steeper valley walls and mountain slopes in alpine settings, which can cause avalanches and rock slides, which add even more material to the glacier. Glacial abrasion is commonly characterized by glacial striations. Glaciers produce these when they contain large boulders that carve long scratches in the bedrock. By mapping the direction of the striations, researchers can determine the direction of the glacier's movement. Similar to striations are chatter marks, lines of crescent-shape depressions in the rock underlying a glacier. They are formed by abrasion when boulders in the glacier are repeatedly caught and released as they are dragged along the bedrock.

 
Glacially plucked granitic bedrock near Mariehamn, Åland

The rate of glacier erosion varies. Six factors control erosion rate:

  • Velocity of glacial movement
  • Thickness of the ice
  • Shape, abundance and hardness of rock fragments contained in the ice at the bottom of the glacier
  • Relative ease of erosion of the surface under the glacier
  • Thermal conditions at the glacier base
  • Permeability and water pressure at the glacier base

When the bedrock has frequent fractures on the surface, glacial erosion rates tend to increase as plucking is the main erosive force on the surface; when the bedrock has wide gaps between sporadic fractures, however, abrasion tends to be the dominant erosive form and glacial erosion rates become slow.[59] Glaciers in lower latitudes tend to be much more erosive than glaciers in higher latitudes, because they have more meltwater reaching the glacial base and facilitate sediment production and transport under the same moving speed and amount of ice.[60]

Material that becomes incorporated in a glacier is typically carried as far as the zone of ablation before being deposited. Glacial deposits are of two distinct types:

  • Glacial till: material directly deposited from glacial ice. Till includes a mixture of undifferentiated material ranging from clay size to boulders, the usual composition of a moraine.
  • Fluvial and outwash sediments: sediments deposited by water. These deposits are stratified by size.

Larger pieces of rock that are encrusted in till or deposited on the surface are called "glacial erratics". They range in size from pebbles to boulders, but as they are often moved great distances, they may be drastically different from the material upon which they are found. Patterns of glacial erratics hint at past glacial motions.

Moraines

edit
 
Glacial moraines above Lake Louise, Alberta, Canada

Glacial moraines are formed by the deposition of material from a glacier and are exposed after the glacier has retreated. They usually appear as linear mounds of till, a non-sorted mixture of rock, gravel, and boulders within a matrix of fine powdery material. Terminal or end moraines are formed at the foot or terminal end of a glacier. Lateral moraines are formed on the sides of the glacier. Medial moraines are formed when two different glaciers merge and the lateral moraines of each coalesce to form a moraine in the middle of the combined glacier. Less apparent are ground moraines, also called glacial drift, which often blankets the surface underneath the glacier downslope from the equilibrium line. The term moraine is of French origin. It was coined by peasants to describe alluvial embankments and rims found near the margins of glaciers in the French Alps. In modern geology, the term is used more broadly and is applied to a series of formations, all of which are composed of till. Moraines can also create moraine-dammed lakes.

Drumlins

edit
 
Drumlins around Horicon Marsh, Wisconsin, in an area with one of the highest concentration of drumlins in the world. The curved path of the Laurentide Ice Sheet is evident in the orientation of the various mounds.

Drumlins are asymmetrical, canoe-shaped hills made mainly of till. Their heights vary from 15 to 50 meters, and they can reach a kilometer in length. The steepest side of the hill faces the direction from which the ice advanced (stoss), while a longer slope is left in the ice's direction of movement (lee). Drumlins are found in groups called drumlin fields or drumlin camps. One of these fields is found east of Rochester, New York; it is estimated to contain about 10,000 drumlins. Although the process that forms drumlins is not fully understood, their shape implies that they are products of the plastic deformation zone of ancient glaciers. It is believed that many drumlins were formed when glaciers advanced over and altered the deposits of earlier glaciers.

Glacial valleys, cirques, arêtes, and pyramidal peaks

edit
 
Features of a glacial landscape

Before glaciation, mountain valleys have a characteristic "V" shape, produced by eroding water. During glaciation, these valleys are often widened, deepened and smoothed to form a U-shaped glacial valley or glacial trough, as it is sometimes called.[61] The erosion that creates glacial valleys truncates any spurs of rock or earth that may have earlier extended across the valley, creating broadly triangular-shaped cliffs called truncated spurs. Within glacial valleys, depressions created by plucking and abrasion can be filled by lakes, called paternoster lakes. If a glacial valley runs into a large body of water, it forms a fjord.

Typically glaciers deepen their valleys more than their smaller tributaries. Therefore, when glaciers recede, the valleys of the tributary glaciers remain above the main glacier's depression and are called hanging valleys.

At the start of a classic valley glacier is a bowl-shaped cirque, which have escarped walls on three sides but is open on the side that descends into the valley. Cirques are where ice begins to accumulate in a glacier. Two glacial cirques may form back to back and erode their backwalls until only a narrow ridge, called an arête is left. This structure may result in a mountain pass. If multiple cirques encircle a single mountain, they create pointed pyramidal peaks; particularly steep examples are called horns.

Roches moutonnées

edit

Passage of glacial ice over an area of bedrock may cause the rock to be sculpted into a knoll called a roche moutonnée,[62] or "sheepback" rock. Roches moutonnées may be elongated, rounded and asymmetrical in shape. They range in length from less than a meter to several hundred meters long.[63] Roches moutonnées have a gentle slope on their up-glacier sides and a steep to vertical face on their down-glacier sides. The glacier abrades the smooth slope on the upstream side as it flows along, but tears rock fragments loose and carries them away from the downstream side via plucking.

Alluvial stratification

edit

As the water that rises from the ablation zone moves away from the glacier, it carries fine eroded sediments with it. As the speed of the water decreases, so does its capacity to carry objects in suspension. The water thus gradually deposits the sediment as it runs, creating an alluvial plain. When this phenomenon occurs in a valley, it is called a valley train. When the deposition is in an estuary, the sediments are known as bay mud. Outwash plains and valley trains are usually accompanied by basins known as "kettles". These are small lakes formed when large ice blocks that are trapped in alluvium melt and produce water-filled depressions. Kettle diameters range from 5 m to 13 km, with depths of up to 45 meters. Most are circular in shape because the blocks of ice that formed them were rounded as they melted.[64]

Glacial deposits

edit
 
Landscape produced by a receding glacier

When a glacier's size shrinks below a critical point, its flow stops and it becomes stationary. Meanwhile, meltwater within and beneath the ice leaves stratified alluvial deposits. These deposits, in the forms of columns, terraces and clusters, remain after the glacier melts and are known as "glacial deposits". Glacial deposits that take the shape of hills or mounds are called kames. Some kames form when meltwater deposits sediments through openings in the interior of the ice. Others are produced by fans or deltas created by meltwater. When the glacial ice occupies a valley, it can form terraces or kames along the sides of the valley. Long, sinuous glacial deposits are called eskers. Eskers are composed of sand and gravel that was deposited by meltwater streams that flowed through ice tunnels within or beneath a glacier. They remain after the ice melts, with heights exceeding 100 meters and lengths of as long as 100 km.

Loess deposits

edit

Very fine glacial sediments or rock flour[65] is often picked up by wind blowing over the bare surface and may be deposited great distances from the original fluvial deposition site. These eolian loess deposits may be very deep, even hundreds of meters, as in areas of China and the Midwestern United States. Katabatic winds can be important in this process.

Retreat of glaciers due to climate change

edit
South Cascade Glacier in Washington photographs from 1928 to 2003 showing the recent rapid glacier retreating
Based on current national pledges, global average temperature increase is projected to cause loss of ~half of Earth's glaciers by 2100 and raise sea level by ~115 mm[66] (not counting rise from melting ice sheets).

Glaciers, which can be hundreds of thousands of years old, are used to track climate change over long periods of time.[67] Researchers melt or crush samples from glacier ice cores whose progressively deep layers represent respectively earlier times in Earth's climate history.[67] The researchers apply various instruments to the content of bubbles trapped in the cores' layers in order to track changes in the atmosphere's composition.[67] Temperatures are deduced from differing relative concentrations of respective gases, confirming that for at least the last million years, global temperatures have been linked to carbon dioxide concentrations.[67]

Human activities in the industrial era have increased the concentration of carbon dioxide and other heat-trapping greenhouse gases in the air, causing current global warming.[68] Human influence is the principal driver of changes to the cryosphere of which glaciers are a part.[68]

 
Ice lagoon Jökulsárlón at the foot of the Vatnajökull Glacier, Iceland, 2023

Global warming creates positive feedback loops with glaciers.[69] For example, in ice–albedo feedback, rising temperatures increase glacier melt, exposing more of earth's land and sea surface (which is darker than glacier ice), allowing sunlight to warm the surface rather than being reflected back into space.[69] Reference glaciers tracked by the World Glacier Monitoring Service have lost ice every year since 1988.[70] A study that investigated the period 1995 to 2022 showed that the flow velocity of glaciers in the Alps accelerates and slows down to a similar extent at the same time, despite large distances. This clearly shows that their speed is controlled by the climate change.[71]

Water runoff from melting glaciers causes global sea level to rise, a phenomenon the IPCC terms a "slow onset" event.[72] Impacts at least partially attributable to sea level rise include for example encroachment on coastal settlements and infrastructure, existential threats to small islands and low-lying coasts, losses of coastal ecosystems and ecosystem services, groundwater salinization, and compounding damage from tropical cyclones, flooding, storm surges, and land subsidence.[72]

Isostatic rebound

edit
 
Isostatic pressure by a glacier on the Earth's crust

Large masses, such as ice sheets or glaciers, can depress the crust of the Earth into the mantle.[73] The depression usually totals a third of the ice sheet or glacier's thickness. After the ice sheet or glacier melts, the mantle begins to flow back to its original position, pushing the crust back up. This post-glacial rebound, which proceeds very slowly after the melting of the ice sheet or glacier, is currently occurring in measurable amounts in Scandinavia and the Great Lakes region of North America.

A geomorphological feature created by the same process on a smaller scale is known as dilation-faulting. It occurs where previously compressed rock is allowed to return to its original shape more rapidly than can be maintained without faulting. This leads to an effect similar to what would be seen if the rock were hit by a large hammer. Dilation faulting can be observed in recently de-glaciated parts of Iceland and Cumbria.

On other planets

edit
 
Protonilus Mensae, Ismenius Lacus quadrangle, Mars

The polar ice caps of Mars show geologic evidence of glacial deposits. The south polar cap is especially comparable to glaciers on Earth.[74] Topographical features and computer models indicate the existence of more glaciers in Mars' past.[75] At mid-latitudes, between 35° and 65° north or south, Martian glaciers are affected by the thin Martian atmosphere. Because of the low atmospheric pressure, ablation near the surface is solely caused by sublimation, not melting. As on Earth, many glaciers are covered with a layer of rocks which insulates the ice. A radar instrument on board the Mars Reconnaissance Orbiter found ice under a thin layer of rocks in formations called lobate debris aprons (LDAs).[76][77][78]

In 2015, as New Horizons flew by the Pluto-Charon system, the spacecraft discovered a massive basin covered in a layer of nitrogen ice on Pluto. A large portion of the basin's surface is divided into irregular polygonal features separated by narrow troughs, interpreted as convection cells fueled by internal heat from Pluto's interior.[79][80] Glacial flows were also observed near Sputnik Planitia's margins, appearing to flow both into and out of the basin.[81]

See also

edit

References

edit
  1. ^ a b Craig, Tim (2016-08-12). "Pakistan has more glaciers than almost anywhere on Earth. But they are at risk". The Washington Post. ISSN 0190-8286. Retrieved 2020-09-04. With 7,253 known glaciers, including 543 in the Chitral Valley, there is more glacial ice in Pakistan than anywhere on Earth outside the polar regions, according to various studies.
  2. ^ Post, Austin; LaChapelle, Edward R (2000). Glacier ice. Seattle: University of Washington Press. ISBN 978-0-295-97910-6.
  3. ^ Staff (June 9, 2020). "Millions at risk as melting Pakistan glaciers raise flood fears". Al Jazeera. Retrieved 2020-06-09.
  4. ^ National Geographic Almanac of Geography, 2005, ISBN 0-7922-3877-X, p. 149.
  5. ^ "170'000 km cube d'eau dans les glaciers du monde". ArcInfo. Aug 6, 2015. Archived from the original on August 17, 2017.
  6. ^ "Ice, Snow, and Glaciers and the Water Cycle". www.usgs.gov. Retrieved 2021-05-25.
  7. ^ Brown, Molly Elizabeth; Ouyang, Hua; Habib, Shahid; Shrestha, Basanta; Shrestha, Mandira; Panday, Prajjwal; Tzortziou, Maria; Policelli, Frederick; Artan, Guleid; Giriraj, Amarnath; Bajracharya, Sagar R.; Racoviteanu, Adina (November 2010). "HIMALA: Climate Impacts on Glaciers, Snow, and Hydrology in the Himalayan Region". Mountain Research and Development. 30 (4). International Mountain Society: 401–404. doi:10.1659/MRD-JOURNAL-D-10-00071.1. hdl:2060/20110015312. S2CID 129545865.
  8. ^ Simpson, D.P. (1979). Cassell's Latin Dictionary (5 ed.). London: Cassell Ltd. p. 883. ISBN 978-0-304-52257-6.
  9. ^ "Glossary of Glacier Terminology". USGS. Retrieved 2017-03-13.
  10. ^ "Retreat of Alaskan glacier Juneau icefield". Nichols.edu. Archived from the original on 2017-10-23. Retrieved 2009-01-05.
  11. ^ "Glossary of Meteorology". American Meteorological Society. Archived from the original on 2012-06-23. Retrieved 2013-01-04.
  12. ^ University of Wisconsin, Department of Geography and Geology (2015). "Morphological Classification of Glaciers" (PDF). www.uwsp.edu/Pages/default.aspx. Archived (PDF) from the original on 2017-08-12.
  13. ^ "Sea Level and Climate". USGS FS 002-00. USGS. 2000-01-31. Retrieved 2009-01-05.
  14. ^ "Types of Glaciers". nsidc.org. National Snow and Ice Data Center. Archived from the original on 2010-04-17.
  15. ^ Bindschadler, R.A.; Scambos, T.A. (1991). "Satellite-image-derived velocity field of an Antarctic ice stream". Science. 252 (5003): 242–46. Bibcode:1991Sci...252..242B. doi:10.1126/science.252.5003.242. PMID 17769268. S2CID 17336434.
  16. ^ "Description of Ice Streams". British Antarctic Survey. Archived from the original on 2009-02-11. Retrieved 2009-01-26.
  17. ^ "What types of glaciers are there?". nsidc.org. National Snow and Ice Data Center. Retrieved 2017-08-12.
  18. ^ a b Lorrain, Reginald D.; Fitzsimons, Sean J. (2011). "Cold-Based Glaciers". In Singh, Vijay P.; Singh, Pratap; Haritashya, Umesh K. (eds.). Encyclopedia of Snow, Ice and Glaciers. Encyclopedia of Earth Sciences Series. Springer Netherlands. pp. 157–161. doi:10.1007/978-90-481-2642-2_72. ISBN 978-90-481-2641-5.
  19. ^ Boulton, G.S. [1974] "Processes and patterns of glacial erosion", (In Coates, D.R. ed., Glacial Geomorphology. A Proceedings Volume of the Fifth Annual Geomorphology Symposia Series, held at Binghamton, New York, September 26–28, 1974. Binghamton, NY, State University of New York, pp. 41–87. (Publications in Geomorphology))
  20. ^ Huggett 2011, pp. 260–262, Glacial and Glaciofluvial Landscapes.
  21. ^ "What causes the blue color that sometimes appears in snow and ice?". Webexhibits.org. Retrieved 2013-01-04.
  22. ^ Benson, C.S., 1961, "Stratigraphic studies in the snow and firn of the Greenland Ice Sheet", Res. Rep. 70, U.S. Army Snow, Ice and Permafrost Res Establ., Corps of Eng., 120 pp.
  23. ^ "Glacier change and related hazards in Switzerland". UNEP. Archived from the original on 2012-09-25. Retrieved 2009-01-05.
  24. ^ Paul, Frank; Kääb, Andreas; Maisch, Max; Kellenberger, Tobias; Haeberli, Wilfried (2004). "Rapid disintegration of Alpine glaciers observed with satellite data" (PDF). Geophysical Research Letters. 31 (21): L21402. Bibcode:2004GeoRL..3121402P. doi:10.1029/2004GL020816. Archived (PDF) from the original on 2007-06-04.
  25. ^ "Recent Global Glacier Retreat Overview" (PDF). Retrieved 2013-01-04.
  26. ^ a b c Greve, R.; Blatter, H. (2009). Dynamics of Ice Sheets and Glaciers. Springer. doi:10.1007/978-3-642-03415-2. ISBN 978-3-642-03414-5. S2CID 128734526.
  27. ^ W.S.B. Paterson, Physics of ice
  28. ^ a b Easterbrook, Don J., Surface Processes and Landforms, 2nd Edition, Prentice-Hall Inc., 1999[page needed]
  29. ^ a b Kessler, Mark A.; Anderson, Robert S.; Briner, Jason P. (2008). "Fjord insertion into continental margins driven by topographic steering of ice". Nature Geoscience. 1 (6): 365. Bibcode:2008NatGe...1..365K. doi:10.1038/ngeo201. Non-technical summary: Kleman, John (2008). "Geomorphology: Where glaciers cut deep". Nature Geoscience. 1 (6): 343. Bibcode:2008NatGe...1..343K. doi:10.1038/ngeo210.
  30. ^ Clarke, Garry K.C. (1987). "A short history of scientific investigations on glaciers". Journal of Glaciology. Special issue (S1): 4–5. Bibcode:1987JGlac..33S...4C. doi:10.3189/S0022143000215785.
  31. ^ "Moulin 'Blanc': NASA Expedition Probes Deep Within a Greenland Glacier". NASA. 2006-12-11. Archived from the original on 2012-11-04. Retrieved 2009-01-05.
  32. ^ Davies, Damon; Bingham, Robert G.; King, Edward C.; Smith, Andrew M.; Brisbourne, Alex M.; Spagnolo, Matteo; Graham, Alastair G. C.; Hogg, Anna E.; Vaughan, David G. (4 May 2018). "How dynamic are ice-stream beds?". The Cryosphere. 12 (5): 1615–1628. Bibcode:2018TCry...12.1615D. doi:10.5194/tc-12-1615-2018. hdl:2164/10495.
  33. ^ a b c d e f g h i j k l m Clarke, G. K. C. (2005). "Subglacial processes". Annual Review of Earth and Planetary Sciences. 33 (1): 247–276. Bibcode:2005AREPS..33..247C. doi:10.1146/annurev.earth.33.092203.122621.
  34. ^ a b c d Boulton, Geoffrey S. (2006). "Glaciers and their Coupling with Hydraulic and Sedimentary Processes". Glacier Science and Environmental Change. pp. 2–22. doi:10.1002/9780470750636.ch2. ISBN 978-0-470-75063-6.
  35. ^ Schoof, C. (2010). "Ice-sheet acceleration driven by melt supply variability". Nature. 468 (7325): 803–806. Bibcode:2010Natur.468..803S. doi:10.1038/nature09618. PMID 21150994. S2CID 4353234.
  36. ^ a b c Fricker, A.; Scambos, T.; Bindschadler, R.; Padman, L. (Mar 2007). "An Active Subglacial Water System in West Antarctica Mapped from Space". Science. 315 (5818): 1544–1548. Bibcode:2007Sci...315.1544F. doi:10.1126/science.1136897. ISSN 0036-8075. PMID 17303716. S2CID 35995169.
  37. ^ Wendleder, Anna; Bramboeck, Jasmin; Izzard, Jamie; Erbertseder, Thilo; d'Angelo, Pablo; Schmitt, Andreas; Quincey, Duncan J.; Mayer, Christoph; Braun, Matthias H. (5 March 2024). "Velocity variations and hydrological drainage at Baltoro Glacier, Pakistan". The Cryosphere. 18 (3): 1085–1103. Bibcode:2024TCry...18.1085W. doi:10.5194/tc-18-1085-2024.
  38. ^ "Glaciers". www.geo.hunter.cuny.edu. Archived from the original on 2014-02-22. Retrieved 2014-02-06.
  39. ^ T. Strozzi et al.: The Evolution of a Glacier Surge Observed with the ERS Satellites Archived 2014-11-11 at the Wayback Machine (pdf, 1.3 Mb)
  40. ^ "The Brúarjökull Project: Sedimentary environments of a surging glacier. The Brúarjökull Project research idea". Hi.is. Retrieved 2013-01-04.
  41. ^ Meier & Post (1969)
  42. ^ "Seasonality and Increasing Frequency of Greenland Glacial Earthquakes" Archived 2008-10-07 at the Wayback Machine, Ekström, G., M. Nettles, and V.C. Tsai (2006) Science, 311, 5768, 1756–1758, doi:10.1126/science.1122112
  43. ^ a b "Analysis of Glacial Earthquakes" Archived 2008-10-07 at the Wayback Machine Tsai, V. C. and G. Ekström (2007). J. Geophys. Res., 112, F03S22, doi:10.1029/2006JF000596
  44. ^ Summerfield, Michael A. (1991). Global Geomorphology. p. 269.
  45. ^ Easterbrook, D.J. (1999). Surface Processes and Landforms (2 ed.). New Jersey: Prentice-Hall, Inc. p. 546. ISBN 978-0-13-860958-0.
  46. ^ "Glossary of Glacier Terminology". Pubs.usgs.gov. 2012-06-20. Retrieved 2013-01-04.
  47. ^ "10 Countries With The Most Glaciers". www.dailyo.in. 2023-07-11. Retrieved 2024-07-03.
  48. ^ Grunewald, p. 129.
  49. ^ "C.D. Ollier: Australian Landforms and their History, National Mapping Fab, Geoscience Australia". Ga.gov.au. 2010-11-18. Archived from the original on 2008-08-08. Retrieved 2013-01-04.
  50. ^ Kincaid, Joni L.; Klein, Andrew G. (2004). Retreat of the Irian Jaya Glaciers from 2000 to 2002 as Measured from IKONOS Satellite Images (PDF). Portland, Maine, USA. pp. 147–157. Archived from the original (PDF) on 2017-05-17. Retrieved 2009-01-05.
  51. ^ "Hawaiian Glaciers Reveal Clues to Global Climate Change". Geology.com. 2007-01-26. Archived from the original on 2013-01-27. Retrieved 2013-01-04.
  52. ^ "French Colonies – Crozet Archipelago". Discoverfrance.net. 2010-12-09. Retrieved 2013-01-04.
  53. ^ Collins, Henry Hill. Europe and the USSR. p. 263. OCLC 1573476.
  54. ^ "Yukon Beringia Interpretive Center". Beringia.com. 1999-04-12. Archived from the original on 2012-10-31. Retrieved 2013-01-04.
  55. ^ "Earth History 2001" (PDF). July 28, 2017. p. 15. Archived from the original (PDF) on March 3, 2016. Retrieved July 28, 2017.
  56. ^ "On the Zoogeography of the Holarctic Region". Wku.edu. Retrieved 2013-01-04.
  57. ^ Huggett 2011, pp. 263–264, Glacial and Glaciofluvial Landscapes.
  58. ^ a b Huggett 2011, p. 263, Glacial and Glaciofluvial Landscapes.
  59. ^ Dühnforth, Miriam; Anderson, Robert S.; Ward, Dylan; Stock, Greg M. (2010-05-01). "Bedrock fracture control of glacial erosion processes and rates". Geology. 38 (5): 423–426. Bibcode:2010Geo....38..423D. doi:10.1130/G30576.1. ISSN 0091-7613.
  60. ^ Koppes, Michéle; Hallet, Bernard; Rignot, Eric; Mouginot, Jérémie; Wellner, Julia Smith; Boldt, Katherine (2015). "Observed latitudinal variations in erosion as a function of glacier dynamics". Nature. 526 (7571): 100–103. Bibcode:2015Natur.526..100K. doi:10.1038/nature15385. PMID 26432248. S2CID 4461215.
  61. ^ "Glacial Landforms: Trough". nsidc.org. National Snow and Ice Data Center.
  62. ^ Huggett 2011, pp. 271, Glacial and Glaciofluvial Landscapes.
  63. ^ Benn, Douglas; Evans, David (1998). Glaciers & Glaciation. London: Arnold. pp. 324–326.
  64. ^ "Kettle geology". Britannica Online. Retrieved 2009-03-12.
  65. ^ Huggett 2011, p. 264, Glacial and Glaciofluvial Landscapes.
  66. ^ Rounce, David R.; Hock, Regine; Maussion, Fabien; Hugonnet, Romain; et al. (5 January 2023). "Global glacier change in the 21st century: Every increase in temperature matters". Science. 379 (6627): 78–83. Bibcode:2023Sci...379...78R. doi:10.1126/science.abo1324. hdl:10852/108771. PMID 36603094. S2CID 255441012.
  67. ^ a b c d Dusto, Amy (28 January 2023). "Climate at the core: how scientists study ice cores to reveal Earth's climate history". climate.gov. National Oceanographic and Atmospheric Administration (NOAA). Archived from the original on 28 January 2023. Reviewed by Erich Osterberg and David Anderson. Applied instruments include mass spectrometers, scanning electron microscopes, and gas chromatographs.
  68. ^ a b "The Causes of Climate Change". climate.nasa.gov. NASA. 2019. Archived from the original on 2019-12-21.
  69. ^ a b Wunderling, Nico; Willeit, Matteo; Donges, Jonathan F.; Winkelmann, Ricarda (27 October 2020). "Global warming due to loss of large ice masses and Arctic summer sea ice". Nature Communications. 11 (1): 5177. Bibcode:2020NatCo..11.5177W. doi:10.1038/s41467-020-18934-3. PMC 7591863. PMID 33110092. Source mentions ice-albedo and melt-elevation feedbacks.
  70. ^ "Global Glacier State". World Glacier Monitoring Service ("under the auspices of: ISC (WDS), IUGG (IACS), UN environment, UNESCO, WMO"). January 2023. Archived from the original on 29 January 2023. See chart on Wikimedia.
  71. ^ Kellerer-Pirklbauer, Andreas; Bodin, Xavier; Delaloye, Reynald; Lambiel, Christophe; Gärtner-Roer, Isabelle; Bonnefoy-Demongeot, Mylène; Carturan, Luca; Damm, Bodo; Eulenstein, Julia; Fischer, Andrea; Hartl, Lea; Ikeda, Atsushi; Kaufmann, Viktor; Krainer, Karl; Matsuoka, Norikazu (2024-03-01). "Acceleration and interannual variability of creep rates in mountain permafrost landforms (rock glacier velocities) in the European Alps in 1995–2022". Environmental Research Letters. 19 (3): 034022. Bibcode:2024ERL....19c4022K. doi:10.1088/1748-9326/ad25a4. ISSN 1748-9326.
  72. ^ a b "IPCC AR6 WGII Summary for Policymakers" (PDF). ipcc.ch. Intergovernmental Panel on Climate Change (IPCC). 2022. Archived (PDF) from the original on 22 January 2023.
  73. ^ Casper, Julie Kerr (2010). Global Warming Cycles: Ice Ages and Glacial Retreat. Infobase Publishing. ISBN 978-0-8160-7262-0 – via Google Books.
  74. ^ "Kargel, J.S. et al.:Martian Polar Ice Sheets and Mid-Latitude Debris-Rich Glaciers, and Terrestrial Analogs, Third International Conference on Mars Polar Science and Exploration, Alberta, Canada, October 13–17, 2003 (pdf 970 Kb)" (PDF). Archived (PDF) from the original on 2008-02-27. Retrieved 2013-01-04.
  75. ^ "Martian glaciers: did they originate from the atmosphere? ESA Mars Express, 20 January 2006". Esa.int. 2006-01-20. Retrieved 2013-01-04.
  76. ^ Head, J. et al. 2005. Tropical to mid-latitude snow and ice accumulation, flow and glaciation on Mars. Nature: 434. 346–350
  77. ^ Plaut, J. et al. 2008. Radar Evidence for Ice in Lobate Debris Aprons in the Mid-Northern Latitudes of Mars. Lunar and Planetary Science XXXIX. 2290.pdf
  78. ^ Holt, J. et al. 2008. Radar Sounding Evidence for Ice within Lobate Debris Aprons near Hellas Basin, Mid-Southern Latitudes of Mars. Lunar and Planetary Science XXXIX. 2441.pdf
  79. ^ Lakdawalla, Emily (21 December 2015). "Pluto updates from AGU and DPS: Pretty pictures from a confusing world". The Planetary Society. Retrieved 24 January 2016.
  80. ^ McKinnon, W. B.; et al. (1 June 2016). "Convection in a volatile nitrogen-ice-rich layer drives Pluto's geological vigour". Nature. 534 (7605): 82–85. arXiv:1903.05571. Bibcode:2016Natur.534...82M. doi:10.1038/nature18289. PMID 27251279. S2CID 30903520.
  81. ^ Umurhan, O. (January 8, 2016). "Probing the Mysterious Glacial Flow on Pluto's Frozen 'Heart'". blogs.nasa.gov. NASA. Retrieved January 24, 2016.

Bibliography

edit
  • Huggett, Richard John (2011). Fundamentals Of Geomorphology. Routledge Fundamentals of Physical Geography Series (3rd ed.). Routledge. ISBN 978-0-203-86008-3.

General references

edit
  • Hambrey, Michael; Alean, Jürg (2004). Glaciers (2nd ed.). Cambridge University Press. ISBN 978-0-521-82808-6. OCLC 54371738. A less-technical treatment of all aspects, with photographs and firsthand accounts of glaciologists' experiences. All images of this book can be found online (see Weblinks: Glaciers-online)
  • Benn, Douglas I.; Evans, David J.A. (1999). Glaciers and Glaciation. Arnold. ISBN 978-0-470-23651-2. OCLC 38329570.
  • Bennett, M.R.; Glasser, N.F. (1996). Glacial Geology: Ice Sheets and Landforms. John Wiley & Sons. ISBN 978-0-471-96344-8. OCLC 33359888.
  • Hambrey, Michael (1994). Glacial Environments. University of British Columbia Press, UCL Press. ISBN 978-0-7748-0510-0. OCLC 30512475. An undergraduate-level textbook.
  • Knight, Peter G. (1999). Glaciers. Cheltenham: Nelson Thornes. ISBN 978-0-7487-4000-0. OCLC 42656957. A textbook for undergraduates avoiding mathematical complexities
  • Walley, Robert (1992). Introduction to Physical Geography. Wm. C. Brown Publishers. A textbook devoted to explaining the geography of our planet.
  • Paterson, W.S.B. (1994). Physics of Glaciers (3rd ed.). Pergamon Press. ISBN 978-0-08-013972-2. OCLC 26188. A comprehensive reference on the physical principles underlying formation and behavior.

Further reading

edit
  • Gornitz, Vivien. Vanishing Ice: Glaciers, Ice Sheets, and Rising Seas (Columbia University Press, 2019) online review
edit
  NODES
admin 1
chat 1
Idea 2
idea 2
INTERN 5
Note 1
Project 5