A syringe is a simple reciprocating pump consisting of a plunger (though in modern syringes, it is actually a piston) that fits tightly within a cylindrical tube called a barrel. The plunger can be linearly pulled and pushed along the inside of the tube, allowing the syringe to take in and expel liquid or gas through a discharge orifice at the front (open) end of the tube. The open end of the syringe may be fitted with a hypodermic needle, a nozzle or tubing to direct the flow into and out of the barrel. Syringes are frequently used in clinical medicine to administer injections, infuse intravenous therapy into the bloodstream, apply compounds such as glue or lubricant, and draw/measure liquids. There are also prefilled syringes (disposable syringes marketed with liquid inside).

Syringe
A typical plastic medical syringe fitted with a detachable stainless steel needle; the syringe is fitted with a male Luer lock fitting which the needle, which is equipped with a female Luer-Lock fitting (purple), screws into
ClassificationMedical device
IndustryHealthcare
ApplicationInjection
InventorCharles Pravaz (screw)
Alexander Wood (plunger)
Invented1853 (171 years ago) (1853)
Disposable syringe with needle, with parts labelled: plunger, barrel, needle adaptor, needle hub, needle bevel, needle shaft
According to the World Health Organization, about 90% of the medical syringes are used to administer drugs, 5% for vaccinations and 5% for other uses such as blood transfusions.[1]

The word "syringe" is derived from the Greek σῦριγξ (syrinx, meaning "Pan flute", "tube").

Medical syringes

edit
 
The threads of the Luer lock tip of this 12mL disposable syringe keep it securely connected to a tube or other apparatus.
 
Syringe made entirely of glass, with no parts made from plastic nor any other material
 
An antique glass and metal syringe

Sectors in the syringe and needle market include disposable and safety syringes, injection pens, needleless injectors, insulin pumps, and specialty needles.[2] Hypodermic syringes are used with hypodermic needles to inject liquid or gases into body tissues, or to remove from the body. Injecting of air into a blood vessel is hazardous, as it may cause an air embolism; preventing embolisms by removing air from the syringe is one of the reasons for the familiar image of holding a hypodermic syringe pointing upward, tapping it, and expelling a small amount of liquid before an injection into the bloodstream.

The barrel of a syringe is made of plastic or glass, usually has graduated marks indicating the volume of fluid in the syringe, and is nearly always transparent. Glass syringes may be sterilized in an autoclave. Plastic syringes can be constructed as either two-part or three-part designs. A three-part syringe contains a plastic plunger/piston with a rubber tip to create a seal between the piston and the barrel, where a two-part syringe is manufactured to create a perfect fit between the plastic plunger and the barrel to create the seal without the need for a separate synthetic rubber piston. Two-part syringes have been traditionally used in European countries to prevent introduction of additional materials such as silicone oil needed for lubricating three-part plungers.[3] Most modern medical syringes are plastic because they are cheap enough to dispose of after being used only once, reducing the risk of spreading blood-borne diseases. Reuse of needles and syringes has caused spread of diseases, especially HIV and hepatitis, among intravenous drug users. Syringes are also commonly reused by diabetics, as they can go through several in a day with multiple daily insulin injections, which becomes an affordability issue for many. Even though the syringe and needle are only used by a single person, this practice is still unsafe as it can introduce bacteria from the skin into the bloodstream and cause serious and sometimes lethal infections.[4] In medical settings, single-use needles and syringes effectively reduce the risk of cross-contamination.[5]

Medical syringes are sometimes used without a needle for orally administering liquid medicines to young children or animals, or milk to small young animals, because the dose can be measured accurately and it is easier to squirt the medicine into the subject's mouth instead of coaxing the subject to drink out of a measuring spoon.

Tip designs

edit

Syringes come with a number of designs for the area in which the blade locks to the syringe body. Perhaps the most well known of these is the Luer lock, which simply twists the two together.

Bodies featuring a small, plain connection are known as slip tips and are useful for when the syringe is being connected to something not featuring a screw lock mechanism.

Similar to this is the catheter tip, which is essentially a slip tip but longer and tapered, making it good for pushing into things where there the plastic taper can form a tight seal. These can also be used for rinsing out wounds or large abscesses in veterinary use.

There is also an eccentric tip, where the nozzle at the end of the syringe is not in the centre of the syringe but at the side. This causes the blade attached to the syringe to lie almost in line with the walls of the syringe itself and they are used when the blade needs to get very close to parallel with the skin (when injecting into a surface vein or artery for example).

Standard U-100 insulin syringes

edit
 
Insulin syringes are marked in insulin "units".

Syringes for insulin users are designed for standard U-100 insulin. The dilution of insulin is such that 1 mL of insulin fluid has 100 standard "units" of insulin.[6] Since insulin vials are typically 10 mL, each vial has 1000 units.

Insulin syringes are made specifically for self injections and have friendly features:

  • shorter needles,[7] as insulin injections are subcutaneous (under the skin) rather than intramuscular,
  • finer gauge needles,[7] for less pain,
  • markings in insulin units to simplify drawing a measured dose of insulin, and[8]
  • low dead space to reduce complications caused by improper drawing order of different insulin strengths.[9]

Multishot needle syringes

edit

There are needle syringes designed to reload from a built-in tank (container) after each injection, so they can make several or many injections on a filling. These are not used much in human medicine because of the risk of cross-infection via the needle. An exception is the personal insulin autoinjector used by diabetic patients and in dual-chambered syringe designs intended to deliver a prefilled saline flush solution after the medication.[21]

Venom extraction syringes

edit

Venom extraction syringes are different from standard syringes, because they usually do not puncture the wound. The most common types have a plastic nozzle which is placed over the affected area, and then the syringe piston is pulled back, creating a vacuum that allegedly sucks out the venom. Attempts to treat snakebites in this way are specifically advised against, as they are ineffective and can cause additional injury.[22]

Syringes of this type are sometimes used for extracting human botfly larvae from the skin.[23]

Oral

edit

An oral syringe is a measuring instrument used to accurately measure doses of liquid medication, expressed in millilitres (mL). They do not have threaded tips, because no needle or other device needs to be screwed onto them. The contents are simply squirted or sucked from the syringe directly into the mouth of the person or animal.

Oral syringes are available in various sizes, from 1–10 mL and larger. An oral syringe is typically purple in colour to distinguish it from a standard injection syringe with a luer tip.[24] The sizes most commonly used are 1 mL, 2.5 mL, 3 mL, 5 mL and 10 mL.[25]

Dental syringes

edit

A dental syringe is used by dentists for the injection of an anesthetic.[26] It consists of a breech-loading syringe fitted with a sealed cartridge containing an anesthetic solution.

In 1928, Bayer Dental developed, coined and produced a sealed cartridge system under the registered trademark Carpule®. The current trademark owner is Kulzer Dental GmbH.

The carpules have long been reserved for anesthetic products for dental use. It is practically a bottomless flask. The latter is replaced by an elastomer plug that can slide in the body of the cartridge. This plug will be pushed by the plunger of the syringe. The neck is closed with a rubber cap. The dentist places the cartridge directly into a stainless steel syringe, with a double-pointed (single-use) needle. The tip placed on the cartridge side punctures the capsule and the piston will push the product. There is therefore no contact between the product and the ambient air during use.

The ancillary tool (generally part of a dental engine) used to supply water, compressed air or mist (formed by combination of water and compressed air) to the oral cavity for the purpose of irrigation (cleaning debris away from the area the dentist is working on), is also referred to as a dental syringe or a dental irrigation nozzle.

A 3-way syringe/nozzle has separate internal channels supplying air, water or a mist created by combining the pressurized air with the waterflow. The syringe tip can be separated from the main body and replaced when necessary.

In the UK and Ireland, manually operated hand syringes are used to inject lidocaine into patients' gums.[27][28][26]

Dose-sparing syringes

edit
 
A dose-sparing syringe and needle being used to draw up a COVID-19 vaccine

A dose-sparing syringe is one which minimises the amount of liquid remaining in the barrel after the plunger has been depressed. These syringes feature a combined needle and syringe, and a protrusion on the face of the plunger to expel liquid from the needle hub. Such syringes were particularly popular during the COVID-19 pandemic as vaccines were in short supply.[29]

Regulation

edit

In some jurisdictions, the sale or possession of hypodermic syringes may be controlled or prohibited without a prescription,[30] due to its potential use with illegal intravenous drugs.[31]

Non-medical uses

edit

The syringe has many non-medical applications.

Laboratory applications

edit
 
Laboratory grease, commonly used to lubricate ground glass joints and stopcocks, is sometimes loaded in syringes for easy application.
 
Some chemical compounds, such as thermal paste and various glues, e.g. epoxy, are sold in prepackaged syringes.

Medical-grade disposable hypodermic syringes are often used in research laboratories for convenience and low cost. Another application is to use the needle tip to add liquids to very confined spaces, such as washing out some scientific apparatus. They are often used for measuring and transferring solvents and reagents where a high precision is not required. Alternatively, microliter syringes can be used to measure and dose chemicals very precisely by using a small diameter capillary as the syringe barrel.

The polyethylene construction of these disposable syringes usually makes them rather chemically resistant. There is, however, a risk of the contents of the syringes leaching plasticizers from the syringe material. Non-disposable glass syringes may be preferred where this is a problem. Glass syringes may also be preferred where a very high degree of precision is important (i.e. quantitative chemical analysis), because their engineering tolerances are lower and the plungers move more smoothly. In these applications, the transfer of pathogens is usually not an issue.

Used with a long needle or cannula, syringes are also useful for transferring fluids through rubber septa when atmospheric oxygen or moisture are being excluded. Examples include the transfer of air-sensitive or pyrophoric reagents such as phenylmagnesium bromide and n-butyllithium respectively. Glass syringes are also used to inject small samples for gas chromatography (1 μl) and mass spectrometry (10 μl). Syringe drivers may be used with the syringe as well.

Cooking

edit

Some culinary uses of syringes are injecting liquids (such as gravy) into other foods, or for the manufacture of some candies.

Syringes may also be used when cooking meat to enhance flavor and texture by injecting juices inside the meat, and in baking to inject filling inside a pastry. It is common for these syringes to be made of stainless steel components, including the barrel. Such facilitates easy disassembly and cleaning.

Others

edit

Syringes are used to refill ink cartridges with ink in fountain pens.

Common workshop applications include injecting glue into tight spots to repair joints where disassembly is impractical or impossible; and injecting lubricants onto working surfaces without spilling.

Sometimes a large hypodermic syringe is used without a needle for very small baby mammals to suckle from in artificial rearing.

Historically, large pumps that use reciprocating motion to pump water were referred to as syringes. Pumps of this type were used as early firefighting equipment.

There are fountain syringes where the liquid is in a bag or can and goes to the nozzle via a pipe. In earlier times, clyster syringes were used for that purpose.

Loose snus is often applied using modified syringes. The nozzle is removed so the opening is the width of the chamber. The snus can be packed tightly into the chamber and plunged into the upper lip. Syringes, called portioners, are also manufactured for this particular purpose.

Historical timeline

edit
 
De Medicina by the Roman author Aulus Cornelius Celsus, later the first medical textbook to be printed
  • Piston syringes were used in ancient times. During the 1st century AD Aulus Cornelius Celsus mentioned the use of them to treat medical complications in his De Medicina.[32]
  • 9th century: The Iraqi/Egyptian surgeon Ammar ibn 'Ali al-Mawsili' described a syringe in the 9th century using a hollow glass tube, and suction to remove cataracts from patients' eyes, a practice that remained in use until at least the 13th century.[33]
  • Pre-Columbian Native Americans created early hypodermic needles and syringes using "hollow bird bones and small animal bladders".[34][35]
  • 1650: Blaise Pascal invented a syringe (not necessarily hypodermic) as an application of what is now called Pascal's law.
  • 1844: Irish physician Francis Rynd invented the hollow needle and used it to make the first recorded subcutaneous injections, specifically a sedative to treat neuralgia.
  • 1853: Charles Pravaz and Alexander Wood independently developed medical syringes with a needle fine enough to pierce the skin. Pravaz's syringe was made of silver and used a screw mechanism to dispense fluids. Wood's syringe was made of glass, enabling its contents to be seen and measured, and used a plunger to inject them. It is effectively the syringe that is used today.
  • 1865: Charles Hunter coined the term "hypodermic", and developed an improvement to the syringe that locked the needle into place so that it would not be ejected from the end of the syringe when the plunger was depressed, and published research indicating that injections of pain relief could be given anywhere in the body, not just in the area of pain, and still be effective.[36]
  • 1867: The Medical and Chirurgical Society of London investigated whether injected narcotics had a general effect (as argued by Hunter) or whether they only worked locally (as argued by Wood). After conducting animal tests and soliciting opinions from the wider medical community, they firmly sided with Hunter.[36]
  • 1899: Letitia Mumford Geer patented a syringe which could be operated with one hand and which could be used for self-administered rectal injections.[37][38]
  • 1946: Chance Brothers in Smethwick, West Midlands, England, produced the first all-glass syringe with interchangeable barrel and plunger, thereby allowing mass-sterilisation of components without the need for matching them.
  • 1949: Australian inventor Charles Rothauser created the world's first plastic, disposable hypodermic syringe at his Adelaide factory.[citation needed]
  • 1951: Rothauser produced the first injection-moulded syringes made of polypropylene, a plastic that can be heat-sterilised. Millions were made for Australian and export markets.
  • 1956: New Zealand pharmacist and inventor Colin Murdoch was granted New Zealand and Australian patents for a disposable plastic syringe.

See also

edit
  • Fire syringe has two meanings:
  • Autoinjector, a device to ease injection, e.g. by the patient or other untrained personnel.
  • Hippy Sippy
  • Jet injector, injects without a needle, by squirting the injection fluid so fast that it makes a hole in the skin.
  • Luer taper, a standardized fitting system used for making leak-free connections between syringe tips and needles.
  • Needle exchange programme, is a social policy based on the philosophy of harm reduction where injecting drug users (IDUs) can obtain hypodermic needles and associated injection equipment at little or no cost.
  • Trypanophobia, a fairly common extreme fear of hypodermic syringes
  • Syrette, similar to a syringe except that it has a closed flexible tube (like that used for toothpaste) instead of a rigid tube and piston.
  • Syringing the ear to remove excess ear wax.
  • Syrinx, the nymph from classical mythology after which syringes were supposedly named.
  • Safety syringe, with features to prevent accidental needlesticks and reuse
  • Vaginal syringe

References

edit
  1. ^ (in French) Swiss Telegraphic Agency, "Deux millions de personnes contaminées lors d'une injection à risque en 2014" Archived 2015-04-28 at the Wayback Machine, Radio télévision suisse, 23 February 2015 (page visited on 23 February 2015).
  2. ^ "Disposable Syringe Markets". TriMark Publications, LLC. June 2013. Archived from the original on 2014-09-11.
  3. ^ "The Anatomy of the Hypodermic Needle and Syringe". www.exchangesupplies.org. Retrieved 18 May 2021.
  4. ^ Bethany, Asked by. "Is it safe to reuse an insulin syringe? - CNN.com". CNN. Archived from the original on 2017-07-10.
  5. ^ "Disposable Medical Supplies Markets". TriMark Publications, LLC. July 2014. Archived from the original on 2014-02-24.
  6. ^ Sinding C (2010-12-08). "Making the unit of insulin: standards, clinical work, and industry, 1920–1925". Bull Hist Med. 76 (2): 231–70. doi:10.1353/bhm.2002.0097. PMID 12060790. S2CID 44334307.
  7. ^ a b "BD Diabetes-Insulin Syringe Needle Sizes". Bd.com. Archived from the original on 2011-09-28. Retrieved 2010-12-30.
  8. ^ "BD Diabetes-Syringe Capacity and Dose Size". Bd.com. Archived from the original on 2011-07-07. Retrieved 2010-12-30.
  9. ^ Brange, Jens (6 December 2012). Galenics of Insulin: The Physico-chemical and Pharmaceutical Aspects of Insulin and Insulin Preparations. Springer Science & Business Media. p. 47. ISBN 978-3-662-02526-0.
  10. ^ a b c "Close-up of BD 1cc Syringes-UltraFine-30 Gauge-1/2", UltraFine II Short-31 Gauge-5/16" & MicroFine-28 Gauge-1/2"". Archived from the original on 2016-02-15. Retrieved 2010-12-30.
  11. ^ a b c "Diabetes Mellitus-Washington State University". Vetmed.wsu.edu. Archived from the original on 2011-01-03. Retrieved 2010-12-30.
  12. ^ a b c "ReliOn Insulin Syringe Markings". Relion.com. Archived from the original on 2010-11-28. Retrieved 2010-12-30.
  13. ^ a b c d e f g h i j k "Diabetes Health Syringe Listings" (PDF). Archived (PDF) from the original on 2011-07-10. Retrieved 2010-12-30.
  14. ^ "Easy Touch Syringe demonstration-their syringes all measure in 1 unit increments". Easytouchsyringes.com. Archived from the original on 2011-07-10. Retrieved 2010-12-30.
  15. ^ a b c "Close-up of BD 1/2 cc Syringes—UltraFine-30 Gauge-1/2", UltraFine II Short-31 Gauge-5/16" & MicroFine-28 Gauge-1/2"". Archived from the original on 2016-02-15. Retrieved 2010-12-30.
  16. ^ "Ulti-Care U100 Syringes-Product Information". Ulti-care.com. Archived from the original on 2011-07-17. Retrieved 2010-12-30.
  17. ^ "Easy Touch Syringes demonstration-all syringes with 1 unit increment markings". Easytouchsyringes.com. Archived from the original on 2011-07-10. Retrieved 2010-12-30.
  18. ^ a b c d e f "Close-up of BD 3/10 Syringes-UltraFine-30 Gauge-1/2", UltraFine II Short-31 Gauge-5/16", UltraFine Short-Half Unit Markings-31 Gauge-5/16" & MicroFine-28 Gauge-1/2"". Archived from the original on 2016-02-15. Retrieved 2010-12-30.
  19. ^ "Easy Touch Syringes-all products measure in 1 unit increment markings". Easytouchsyringes.com. Archived from the original on 2011-07-10. Retrieved 2010-12-30.
  20. ^ "Comparison of 3/10 cc syringe marks—half unit and whole unit scale-BD". Archived from the original on 2011-09-28. Retrieved 2010-12-30.
  21. ^ May-Newman K, Matyska MT, Lee MN (June 2011). "Design an Preliminary Testing of a Novel Dual-Chambered Syringe". Journal of Medical Devices. 5 (2): 021003. doi:10.1115/1.4003822.
  22. ^ Bush MD, Sean P. (February 2004). "Snakebite Suction Devices Don't Remove Venom: They Just Suck" (PDF). Annals of Emergency Medicine. 43 (2): 187–188. doi:10.1016/j.annemergmed.2003.10.031. PMID 14747806. Archived (PDF) from the original on 2013-05-17. Retrieved 2014-12-24.
  23. ^ Boggild, Andrea K.; Jay S. Keystone; Kevin C. Kain (August 2002). "Furuncular myiasis: a simple and rapid method for extraction of intact Dermatobia hominis larvae". Clinical Infectious Diseases. 35 (3): 336–338. doi:10.1086/341493. PMID 12115102.
  24. ^ "Precision Oral Syringes Frequently asked questions". oralsyringes.uk. 30 March 2018.
  25. ^ "How to use your oral syringe". Netdoctor. 2012-11-23. Archived from the original on 2011-01-04.
  26. ^ a b "Lidocaine Hydrochloride (Local) Monograph for Professionals - Drugs.com". Archived from the original on 2017-07-29.
  27. ^ Zakrzewska, J. M.; Boon, E. C. (23 August 2003). "Use of safety dental syringes in British and Irish dental schools". British Dental Journal. 195 (4): 207–209. doi:10.1038/sj.bdj.4810445. PMID 12970703.
  28. ^ Zakrzewska, J. M.; Greenwood, I.; Jackson, J. (27 January 2001). "Cross-infection control: Introducing safety syringes into a UK dental school – a controlled study". British Dental Journal. 190 (2): 88–92. doi:10.1038/sj.bdj.4800891. PMID 11213339.
  29. ^ "Government orders 65m syringes ahead of potential Covid-19 vaccine". www.pulsetoday.co.uk. 14 July 2020. Retrieved 2021-04-15.
  30. ^ "Children With Diabetes-Prescription Needed or Not?". Childrenwithdiabetes.com. Archived from the original on 2010-12-14. Retrieved 2010-12-30.
  31. ^ "Criminal Law and Syringe Disposal in Delaware". Archived from the original on 2013-03-30. Retrieved 2012-04-03.
  32. ^ Feldmann, H. (1999). "Die zweitausendjährige Geschichte der Ohrenspritze und ihre Verflechtung mit dem Klistier". Laryngorhinootologie. 78 (8): 462–467. doi:10.1055/s-2007-996909. PMID 10488468.
  33. ^ Finger, Stanley (1994). Origins of Neuroscience: A History of Explorations Into Brain Function. Oxford University Press. p. 70. ISBN 978-0-19-514694-3.
  34. ^ "16 Indian Innovations: From Popcorn to Parkas". news.nationalgeographic.com. Archived from the original on 2017-10-16. Retrieved 2017-12-25.
  35. ^ "10 Native Inventions and Innovations That Changed the World - Indian Country Media Network". indiancountrymedianetwork.com. Archived from the original on 2017-12-25. Retrieved 2017-12-25.
  36. ^ a b Brunton, D. (2000). "A Question of Priority: Alexander Wood, Charles Hunter and the Hypodermic Method". Proceedings of the Royal College of Physicians of Edinburgh. 30 (4): 349–351. doi:10.1177/147827150003000414. S2CID 248921807.
  37. ^ Rishavy, Aimee (4 March 2021). "Most Influential Women in Medicine & Health Care - Women's History Month, 2021". MedSource Labs. Retrieved 30 May 2022.
  38. ^ Geer, L.M. (11 April 1899). "Syringe (US Patent 622,848)" (PDF). United States Patent Office. Retrieved 30 May 2022.
  39. ^ Walford, Cornelius. The insurance cyclopaedia: being a dictionary of the definitions of terms used in connexion with the theory and practice of insurance in all its branches: a biographical summary ... a bibliographical repertory of all works written upon the subject ... an . London: C. and E. Layton ;, 1871,1880. 337 Print. Walford, Cornelius (1874). "The Insurance Cyclopeadia: Being a Dictionary of the Definitions of Terms Used in Connexion with the Theory and Practice of Insurance in All its Branches: A Biographical Summary ... A Bibliographical Repertory of All Works Written Upon the Subject ... An Historical Treasury of Events and Circumstances Connected with the Origin and Progress of Insurance". Archived from the original on 2017-02-23. Retrieved 2016-10-29.

Further reading

edit
  • Hans-Jürgen Bässler und Frank Lehmann : Containment Technology: Progress in the Pharmaceutical and Food Processing Industry. Springer, Berlin 2013, ISBN 978-3642392917
edit
  NODES
admin 4
COMMUNITY 1
innovation 2
INTERN 1
Note 1
USERS 3