Learn more: PMC Disclaimer | PMC Copyright Notice
Three-dimensional quantitative analysis of dental and skeletal characteristics of skeletal Class I unilateral posterior crossbite in adults
1Associated Data
Abstract
Background
To study the dentoskeletal characteristics and the degree of compensations in skeletal Class I adults with unilateral posterior crossbite (UPCB).
Methods
A sample of 40 adults was chosen for this cross-sectional study. 20 skeletal Class I adults with UPCB (mean age: 22.20 ± 2.88 years), were compared to 20 skeletal Class I adults with normal occlusion (mean age: 27.56 ± 5.76 years). The respective dentoskeletal measurements were made on cross-sectional images from cone-beam computed tomography scans.
Results
Skeletally, both groups showed significant differences (P < 0.05) in mandibular corpus length and menton deviation with the UPCB group showing the greatest displacement. Maxillomandibular vertical asymmetry and condylar positional asymmetry were not significant in both groups (P > 0.05). For dental variables on the second premolar and first molar, the UPCB group showed greater linear and angular differences when compared to the control group (P < 0.05). On the crossbite side, maxillary posterior teeth were more buccally inclined, and mandibular posterior teeth were more lingually inclined. However, on the non-crossbite side, both maxillary and mandibular posterior teeth were lingually inclined.
Conclusion
Adults with UPCB showed distinct transverse dentoskeletal asymmetry. No asymmetry was found in the condylar position and the mandibular height in UPCB adults.
Background
Posterior crossbite has been defined as a transverse arch discrepancy in which the palatal cusps of one or more upper posterior teeth do not occlude in the central fossae of the opposing lower teeth [1]. The prevalence of posterior crossbite reported ranges from 7.7 to 22% in adolescents, with a predominance of unilateral posterior crossbite (UPCB) [2, 3]. Among adults, the incidence of UPCB is even higher, which is between 10 and 30% [4].
Untreated UPCB might be an etiologic factor of progressive anatomical skeletal asymmetry [2, 5, 6]. Approximately 79–90% of children with UPCB presented with a mandibular functional shift [2, 3], but this is hardly detected in UPCB adults. Some studies [7, 8] demonstrated that this phenomenon can be explained by the progressive asymmetric adaptation that gradually leads to permanent structural asymmetry. Compared with early correction, treatment of UPCB in adults is relatively more complex since the expansion of the dental arch is limited, and the underlying skeletal asymmetries might be neglected. It must be decided whether the posterior crossbite is a true skeletal asymmetry or only involves dentoalveolar structures before determining a treatment plan.
However, the extent to which UPCB influences dentoalveolar and skeletal structures and their relationships remain controversial due to study design variations, sample grouping, and radiographic assessment methods [7, 9–12]. Previous studies that involved UPCB adults have mainly focused on the transverse dentoskeletal asymmetries and restricted to Caucasians demographically [7, 9]. Nevertheless, the transverse dentoskeletal morphology was reported to be affected by both sagittal and vertical skeletal discrepancies as well [13, 14]. Furthermore, most of the assessments were computed on two-dimensional (2D) radiographs with inherent limitations such as unwanted magnification and superimposition. Compared with 2D radiographs, cone-beam computed tomography (CBCT) could provide three-dimensional (3D) assessments and substantially reduce the distortion of the images [15, 16].
Although the assessment of mandibular and dental arch asymmetry in UPCB patients has been of great interest in previous literature [7, 9, 11, 12], few studies [7] have systematically studied both dentoalveolar and skeletal adaption patterns in UPCB adults. Therefore, the present study aims to study the dentoskeletal characteristics and the degree of compensation in skeletal Class I adults with UPCB when compared to the adults with skeletal Class I, normal occlusion using CBCT. The tested null hypothesis is that skeletal Class I UPCB adults do not exhibit a significantly greater degree of maxillomandibular skeletal asymmetry between the crossbite and non-crossbite side compared to adults with skeletal Class I normal occlusion.
Methods
The sample of this study consists of 40 adults, referrals from the West China School of Stomatology, Sichuan University, Chengdu, China. The study was approved by the Institutional Review Board of West China School of Stomatology (approval number WCHSIRB-D-2018-131). 20 normal occlusion skeletal Class I adults (7 males, 13 females; 27.56 ± 5.76 years old) were selected for the control group, and the UPCB group comprised 20 skeletal Class I adults (8 males, 12 females; 22.20 ± 2.88 years old) with UPCB, the enrollment criteria are shown in Table Table11.
Table 1
Inclusion criteria for sample selection
| Control group | UPCB group |
|---|---|
| Dental and skeletal Class I (0° ≤ ANB < 4°) [17] relationship without UPCB | Skeletal Class I (0° ≤ ANB < 4°) [17] malocclusion with UPCB involving at least two posterior teeth, Edge-to-edge tooth was excluded |
| Average growth pattern (20° ≤ FMA ≤ 30°) [18] | Average growth pattern (20° ≤ FMA ≤ 30°) [18] |
| All teeth present except the third molars | All teeth present except the third molars |
| No or mild crowding (< 4 mm) | No or mild crowding (< 4 mm) |
| Condyle and glenoid fossa with continuous cortical bone | Condyle and glenoid fossa with continuous cortical bone |
| No previous orthodontic treatment or craniofacial surgery | No previous orthodontic treatment or craniofacial surgery |
| No crown or cuspal restorations, and no or mild tooth abrasion | No crown or cuspal restorations, and no or mild tooth abrasion |
| Absence of congenital malformations and craniofacial anomalies | Absence of congenital malformations and craniofacial anomalies |
ANB Angle formed by A-point-nasion-B-point; FMA the angle between FH plane and mandibular plane; UPCB unilateral posterior crossbite
All subjects had CBCT scans (Philips MX 16-slice) taken in maximum intercuspation, which were obtained at 90 kV and 40 mA with a slice thickness of 0.49 mm. Digital Imaging and Communications in Medicine (DICOM) files obtained from the CBCT scans were reconstructed using Dolphin 3D (Dolphin Imaging, version 11.7, Chatsworth, CA91311, USA) software. Reorientation of each scan was performed using the standardized 3D reference planes. The landmarks, measurements, and reference planes selected for this investigation were shown in Figs. Figs.1,1, ,2,2, and and3.3. The following reference planes were used to ensure the consistent orientation of the 2D cross-sectional slices: (1) Frankfort horizontal (FH) plane: plane passing through right porion, left porion, and midpoint of left and right orbitale, (2) midsagittal plane (MSP): plane perpendicular to FH plane, passing through the neck of the crista galli and Opisthion, (3) coronal plane: plane perpendicular to FH plane and MSP, passing through Op.
Landmarks and measurements in three-dimensional skeletal analysis. A Coronal view; B axial view; C sagittal view
Positional assessments of the condylar. A Measurements of the anteroposterior relationship and lateromedial displacement of the condylar. GC, the geometric center of the condyle; a, the anteroposterior distance difference between GC of the right and left condyle to the MSP; b, the long axis of the condylar process; c, the distance between CG of the right and left condyle to the MSP; θ, the angle between the long axis of the condylar process and the MSP. B Measurements of the vertical relationship of the condylar. d, the vertical distance difference between GC of the right and left condyle to the MSP
Dentoalveolar measurements of second premolars on coronal view. A, D a, the transverse width of the second premolar, distance from buccal cusp to the MSP; b, bucco alveolar crest width; c, bucco midalveolar widths; B, E d, palatal alveolar crest width; e, palatal midalveolar widths; C, F θ, the inclination of the second premolar
Skeletal analysis
On the coronal view, the jugal process (J) and antegonial (Ag) widths on each side were assessed relative to MSP. The sum of both sides represented the total width of the maxilla (J–J) and mandible (Ag–Ag) respectively. The maxillomandibular width difference was calculated by subtracting the total maxillary width with the total mandibular width [(J–J) − (Ag–Ag)] (Fig. 1A). Menton (Me) deviation was measured relative to MSP to indicate mandibular displacement. The corpus length of the mandible was measured for both sides from the most posterior point of the gonial angle, gonion posterius (Gopost) to the menton (Me) on the axial view (Fig. 1B).
Maxillary vertical assessments were investigated by measuring the distance from the jugal process to the FH plane (J-FH) (Fig. 1A). The vertical assessments of the mandible were made according to Habets’ technique [19] and made separately for both sides on the sagittal view of the CBCT image. The most posterior points on the condyle and ramus were marked as A1 and A2, respectively. A line that passed through points A1 and A2 were termed the A-line. A second line drawn from the most superior point of the condylar (Co) and perpendicular to the A-line, was termed the B-line. The intersection of the A- and B-line was called point Z. The distances between points A1 and Z were measured as condylar height (CH). Similarly, the distances between points A1 and A2 were measured as ramus height (RH), and the distances between points Z and A2 were measured as condylar plus ramus heights (CH + RH) (Fig. 1C). The asymmetry index [19] of condylar height (CAI), ramal height (RAI), and condylar plus ramal height (CRAI) were calculated based on the following formula:
Condylar analysis
The geometric center (GC) of the condyles was first identified on the axial view. Then, the anteroposterior [20] (Fig. 2A) and vertical [21] (Fig. 2B) relationship of the condylar was measured by calculating the distance difference between the GC of the right and left condyle to the MSP. The right or the crossbite side of the condyle was considered as 0 point [20]. A positive value indicates that the left or the non-crossbite side of the condyle was positioned anterior or higher to the 0 point, and a negative value indicates a posterior or lower position. The transverse position of the condylar was measured by calculating the distance between the GC of the condylar and MSP. The lateromedial displacement of the condyle was assessed by measuring the angle between the long axis of the condylar process and the MSP (Fig. 2A).
Dentoalveolar analysis
Dentoalveolar measurements were made on the second premolar (Fig. 3) and first molar (Fig. 4) of both arches. The midalveolar widths of the maxilla and mandible were determined at 7 mm apical to the alveolar crest [14]. The inclination of the second premolar and the first molar was determined as the angle between the long axis of the tooth and the vertical reference line. For single-rooted molar and premolar, the long axis was defined as the line connecting the groove between the buccal and palatal cusps and the root apex. For multi-rooted molar and premolar, the long axis was defined as the line connecting the groove between the buccal and palatal cusps and the furcation of the roots.
Dentoalveolar measurements of first molars on coronal view. A, D a, the transverse width of the first molar, distance from mesiobuccal cusp to the MSP; b, bucco alveolar crest width; c, bucco midalveolar widths; B, E d, palatal alveolar crest width; e, palatal midalveolar widths; C, F θ, the inclination of the first molar
The difference between bilateral structures was calculated by right or crossbite side minus left or non-crossbite side. For all linear measurements, a positive value indicates the right or crossbite side is larger than the left or non-crossbite side, and the opposite for the negative value. The maxillomandibular width difference was calculated by subtracting the total maxillary width from the total mandibular width. For menton deviations, a positive value indicates the mandible was displaced toward the right or the crossbite side, and a negative value indicates the mandible was displaced toward the left or the non-crossbite side. For tooth inclinations, a positive value indicates a buccoversion of the crown and a negative value indicates a linguoversion of the crown in relation to root apex (single root) or root furcation (multirooted tooth).
Statistical analysis
A priori sample size calculation was performed with PASS Sample Size Software V.15 (NCSS LLC., 121 Kaysville, Utah, USA). Mean and standard deviation of mandibular body length on the crossbite side in UPCB adults (81.46 ± 4.95) and the right side on the normal occlusion adults (72.12 ± 11.83) reported by Veli et al. [22] was taken as the reference value. The power was set at 80%, and a statistical significance of 0.05 and an effect size of 0.5 was considered. As a result, the sample size calculated was 16 per group, and 20 samples were selected for each group.
To prevent inter-observer error, all the procedures were performed by one author. All measurements were repeated for 10 randomly selected CBCTs after at least a one-week interval to determine the measurement error. A paired t-test and Bland & Altman plot were applied to access the reproducibility of the measurements, and no significant differences were found between the first and second measurements. The error of the method was calculated with the intraclass correlation coefficient (ICC).
The data were determined to have a normal distribution when assessed with the Shapiro-Wilks test. Mean and standard deviation values were calculated for all normalized measurements in each of the corresponding groups. The paired t-test was used for the intragroup comparison whereas the intergroup comparison was analyzed using an independent t-test.
Results
The reliability of all measurements was 0.923–0.989 based on the ICC test. The patients’ characteristics and demographics were summarized in Table Table2.2. There was no gender difference between groups. Therefore, the data were pooled from male and female groups for analysis. No side-specific prevalence difference was observed in the UPCB group, thus the measurements from the left and right sides of UPCB group were combined and evaluated as crossbite and non-crossbite sides.
Table 2
Summary of patient characteristics and demographics
| Variables | Control group (n = 20) | UPCB group (n = 20) | P value |
|---|---|---|---|
| Gendera | |||
| M, n (%) | 7 (35) | 8 (40) | 0.935 |
| F, n (%) | 13 (65) | 12 (60) | |
| Age (y) (mean ± SD)b | 27.56 ± 5.76 | 22.20 ± 2.88 | 0.000* |
| ANB (°) (mean ± SD)b | 2.48 ± 1.07 | 1.80 ± 1.14 | 0.094 |
| FMA (°) (mean ± SD)b | 25.02 ± 3.15 | 26.15 ± 3.53 | 0.153 |
UPCB unilateral posterior crossbite; M male; F female; n number; SD standard deviation; ANB Angle formed by A-point-nasion-B-point; FMA the angle between FH plane and mandibular plane
aChi-square test
bIndependent t-test
Statistically significant when *(P < 0.05)
The Control group showed significant side differences in mandibular corpus length (P = 0.002) and angle of the condylar process (P = 0.044). In the UPCB group, RH (P = 0.004), CH + RH (P = 0.003), and mandibular corpus length (P = 0.000) were significantly greater on the non-crossbite side. Antegonial widths were found to be significantly higher on the crossbite side (P = 0.000, Table Table3).3). Both groups showed transverse dental asymmetries in linear and angular measurements, and the difference in UPCB group was more significant (P < 0.05, Table Table4).4). In UPCB group, the maxillary posterior teeth were more buccally inclined, and mandibular posterior teeth were lingually inclined on the crossbite side. Mandibular posterior teeth were more upright on the non-crossbite side (Table (Table44).
Table 3
Statistical Side Comparisons of Skeletal Variables in the Control Group and UPCB Group
| Control group | UPCB Group | |||||||
|---|---|---|---|---|---|---|---|---|
| Right side | Left side | Crossbite side | Non-crossbite side | |||||
| Mean ± SD | Mean ± SD | t value | P value | Mean ± SD | Mean ± SD | t value | P value | |
| Morphological measurements of maxilla and mandible | ||||||||
| Vertical | ||||||||
| Maxillary height (mm) | 29.26 ± 2.81 | 29.23 ± 2.88 | − 0.343 | 0.735 | 30.23 ± 2.68 | 30.72 ± 3.08 | − 1.946 | 0.067 |
| CH (mm) | 7.47 ± 1.70 | 7.22 ± 1.84 | 0.416 | 0.682 | 7.28 ± 2.14 | 8.01 ± 1.64 | − 1.102 | 0.284 |
| RH (mm) | 42.18 ± 3.58 | 41.77 ± 4.33 | 0.474 | 0.641 | 41.32 ± 4.63 | 45.50 ± 3.30 | − 3.247 | 0.004* |
| CH + RH (mm) | 49.64 ± 3.32 | 48.99 ± 4.26 | 0.933 | 0.363 | 48.60 ± 5.72 | 53.50 ± 3.09 | − 3.337 | 0.003* |
| Sagittal | ||||||||
| Mandibular corpus length (mm) | 82.24 ± 4.25 | 80.67 ± 4.31 | 3.633 | 0.002* | 78.34 ± 5.08 | 81.99 ± 5.39 | − 6.731 | 0.000* |
| Transverse | ||||||||
| Jugal process width (mm) | 32.99 ± 1.95 | 32.66 ± 1.98 | 0.948 | 0.355 | 32.18 ± 2.35 | 31.87 ± 2.09 | 1.021 | 0.320 |
| Antegonial width (mm) | 43.31 ± 2.67 | 43.64 ± 3.50 | − 0.378 | 0.710 | 46.60 ± 2.29 | 40.05 ± 3.27 | 7.755 | 0.000* |
| Positional measurements of condylar | ||||||||
| Anteroposterior difference of condylar process (mm) | 0 ± 0 | 0.22 ± 2.09 | 0.470 | 0.644 | 0 ± 0 | 0.96 ± 3.45 | − 1.241 | 0.230 |
| Vertical difference of condylar process (mm) | 0 ± 0 | 0.35 ± 1.21 | − 1.30 | 0.209 | 0 ± 0 | 0.17 ± 2.18 | − 3.40 | 0.737 |
| Transverse position of condylar process (mm) | 53.22 | 53.09 | − 0.429 | 0.673 | 52.12 ± 2.76 | 51.98 ± 2.78 | 0.271 | 0.789 |
| Angle of condylar process (°) | 74.69 ± 6.63 | 72.47 ± 5.23 | 2.159 | 0.044* | 73.99 ± 8.38 | 76.08 ± 6.50 | − 0.991 | 0.334 |
UPCB unilateral crossbite; SD standard deviation; CH condylar height; RH ramal height; CH + RH condylar-plus-ramal height
Statistically significant when *(P < 0.05)
Table 4
Statistical side comparisons of dentoalveolar variables in the control group and UPCB group
| Control group | UPCB group | |||||||
|---|---|---|---|---|---|---|---|---|
| Right side | Left side | Crossbite side | Non-crossbite side | |||||
| Mean ± SD | Mean ± SD | t value | P value | Mean ± SD | Mean ± SD | t value | P value | |
| Linear measurements | ||||||||
| Maxillary transverse width—premolar | ||||||||
| Premolar (mm) | 24.28 ± 2.16 | 25.31 ± 1.52 | − 1.808 | 0.086 | 26.19 ± 2.62 | 23.98 ± 1.69 | 3.909 | 0.001* |
| Buccal alveolar crest (mm) | 26.11 ± 1.92 | 26.35 ± 1.83 | − 0.457 | 0.645 | 26.56 ± 1.66 | 25.43 ± 1.34 | 2.729 | 0.013* |
| Buccal midalveolar (mm) | 26.95 ± 2.05 | 26.99 ± 1.59 | − 0.076 | 0.940 | 27.32 ± 1.70 | 27.14 ± 1.88 | 0.505 | 0.620 |
| Palatal alveolar crest (mm) | 17.20 ± 2.11 | 17.47 ± 1.82 | − 0.520 | 0.609 | 18.10 ± 2.09 | 16.93 ± 1.41 | 2.443 | 0.024* |
| Palatal midalveolar (mm) | 13.67 ± 1.63 | 14.29 ± 1.62 | − 1.223 | 0.236 | 13.64 ± 1.64 | 14.38 ± 2.06 | − 1.725 | 0.101 |
| Maxillary transverse width—molar | ||||||||
| Molar (mm) | 27.58 ± 2.03 | 28.37 ± 1.63 | − 1.784 | 0.090 | 29.59 ± 2.52 | 26.44 ± 1.34 | 4.955 | 0.000* |
| Buccal alveolar crest (mm) | 29.05 ± 2.00 | 29.59 ± 1.63 | − 1.317 | 0.204 | 29.32 ± 3.21 | 28.56 ± 1.60 | 0.966 | 0.346 |
| Buccal midalveolar (mm) | 32.02 ± 1.88 | 32.29 ± 1.93 | − 0.689 | 0.499 | 31.47 ± 3.38 | 31.58 ± 1.77 | − 0.155 | 0.878 |
| Palatal alveolar crest (mm) | 17.61 ± 1.79 | 18.31 ± 1.32 | − 1.810 | 0.086 | 18.62 ± 2.28 | 17.17 ± 1.23 | 2.605 | 0.017* |
| Palatal midalveolar (mm) | 15.11 ± 1.51 | 15.49 ± 1.39 | − 0.882 | 0.389 | 15.77 ± 2.03 | 15.11 ± 1.75 | 1.295 | 0.211 |
| Mandibular transverse width—premolar | ||||||||
| Premolar (mm) | 20.18 ± 2.34 | 21.45 ± 1.40 | − 2.302 | 0.033* | 25.77 ± 3.12 | 18.00 ± 1.05 | 9.764 | 0.000* |
| Buccal alveolar crest (mm) | 23.80 ± 2.11 | 24.57 ± 1.61 | − 1.340 | 0.196 | 28.47 ± 2.08 | 20.26 ± 1.66 | 13.279 | 0.000* |
| Buccal midalveolar (mm) | 24.97 ± 2.26 | 26.25 ± 1.89 | − 1.859 | 0.079 | 29.05 ± 2.77 | 20.73 ± 1.72 | 10.687 | 0.000* |
| Lingual alveolar crest (mm) | 15.98 ± 2.37 | 17.04 ± 1.37 | − 1.677 | 0.110 | 21.03 ± 2.86 | 13.52 ± 2.77 | 6.731 | 0.000* |
| Lingual midalveolar (mm) | 11.14 ± 3.18 | 12.31 ± 1.83 | − 1.450 | 0.163 | 18.63 ± 2.72 | 9.18 ± 5.39 | 9.343 | 0.000* |
| Mandibular transverse width—molar | ||||||||
| Premolar (mm) | 24.09 ± 1.98 | 25.51 ± 1.30 | − 3.380 | 0.003* | 29.07 ± 2.05 | 22.65 ± 1.65 | 12.467 | 0.000* |
| Buccal alveolar crest (mm) | 28.01 ± 1.94 | 29.18 ± 1.51 | − 2.437 | 0.025* | 32.70 ± 2.06 | 24.981 ± 1.52 | 13.440 | 0.000* |
| Buccal midalveolar (mm) | 30.65 ± 2.24 | 32.24 ± 1.67 | − 2.586 | 0.018* | 34.89 ± 2.22 | 26.45 ± 1.66 | 11.895 | 0.000* |
| Lingual alveolar crest (mm) | 18.30 ± 2.17 | 19.55 ± 1.43 | − 2.446 | 0.024* | 23.71 ± 1.81 | 15.31 ± 1.37 | 16.887 | 0.000* |
| Lingual midalveolar (mm) | 15.99 ± 2.36 | 17.00 ± 1.68 | − 1.717 | 0.102 | 21.99 ± 2.65 | 12.23 ± 1.84 | 15.682 | 0.000* |
| Angular measurements | ||||||||
| Inclinations if maxillary teeth | ||||||||
| Premolar (°) | 0.67 ± 5.22 | 1.52 ± 3.29 | − 0.740 | 0.468 | 3.90 ± 6.82 | − 1.43 ± 4.36 | 3.198 | 0.005* |
| Molar (°) | 3.90 ± 5.04 | 7.63 ± 3.61 | − 3.409 | 0.003* | 9.25 ± 8.38 | 0.14 ± 3.90 | 4.104 | 0.001* |
| Inclinations if mandibular teeth | ||||||||
| Premolar (°) | − 9.08 ± 5.22 | − 10.64 ± 4.03 | 1.198 | 0.246 | − 13.91 ± 5.35 | − 3.85 ± 4.75 | − 6.519 | 0.000* |
| Molar (°) | − 15.47 ± 3.55 | − 15.95 ± 4.11 | 0.323 | 0.751 | − 17.45 ± 6.20 | − 9.27 ± 5.09 | − 4.542 | 0.000* |
SD standard deviation; UPCB unilateral posterior crossbite
Statistically significant when *(P < 0.05)
Maxillomandibular skeletal vertical asymmetry and condylar asymmetry were not statistically significant between groups (P > 0.05). Although the UPCB group showed a significantly larger antegonial width difference (P < 0.05), no significant difference was seen in the interantegonial width and maxillomandibular width difference (P > 0.05) when compared to the control group. The differences in mandibular corpus length and menton displacement were significantly greater in UPCB group than in control group (P < 0.05, Table Table5).5). The difference in mandibular dentoalveolar width measurements was significantly greater in UPCB group compared to control group (P < 0.05). However, in the maxilla, significant differences were only observed in the maxillary premolar width, maxillary molar width, and maxillary molar palatal alveolar crest width in comparison to control group. The changes in the buccolingual inclination of posterior teeth in both arches were greater in UPCB group (P < 0.05, Table Table66).
Table 5
Inter-group comparisons of skeletal variables between the control group and UPCB group
| Control group | UPCB group | |||||
|---|---|---|---|---|---|---|
| Mean ± SD | 95% CI | Mean ± SD | 95% CI | t value | P value | |
| Morphological measurements of the maxilla and mandible | ||||||
| Vertical | ||||||
| Maxillary height difference (mm) | 0.34 ± 0.44 | − 0.17, 0.24 | − 0.49 ± 1.13 | − 1.02, 0.03 | 1.94 | 0.064 |
| CAI (%) | 14.41 ± 10.08 | 9.69, 19.13 | 17.9 ± 11.49 | 12.53, 23.29 | − 1.023 | 0.313 |
| RAI (%) | 3.53 ± 3.03 | 2.09, 4.93 | 6.20 ± 5.85 | 3.46, 8.94 | − 1.822 | 0.079 |
| CRAI (%) | 2.59 ± 1.99 | 1.65, 3.52 | 7.92 ± 11.75 | 2.43, 13.43 | − 2.00 | 0.059 |
| Sagittal | ||||||
| Mandibular corpus length difference (mm) | 1.58 ± 1.94 | 0.67, 2.48 | − 3.65 ± 2.42 | − 4.79, − 2.52 | 7.53 | 0.000* |
| Transverse | ||||||
| Jugal process width difference (mm) | 0.93 ± 3.01 | − 0.48, 2.34 | 0.18 ± 1.12 | − 0.35, 0.70 | 0.426 | 0.672 |
| Antegonial width difference (mm) | − 0.33 ± 3.91 | − 2.16, 1.50 | 6.54 ± 3.77 | 4.78, 8.31 | − 5.659 | 0.000* |
| Interjugular width (mm) | 65.65 ± 3.61 | 63.96, 67.33 | 65.14 ± 3.96 | 65.14, 66.99 | 1.051 | 0.304 |
| Interantegonial width (mm) | 86.66 ± 4.90 | 84.68, 89.22 | 86.65 ± 4.21 | 84.68, 88.61 | 0.212 | 0.833 |
| Maxillomandibular width difference (mm) | − 21.31 ± 3.85 | − 23.11, − 19.50 | − 22.60 ± 3.89 | − 22.41, − 20.78 | 1.058 | 0.297 |
| Menton deviation (mm) | − 0.49 ± 2.54 | − 1.67, 0.70 | 3.18 ± 5.01 | 0.83, 5.53 | − 2.922 | 0.006* |
| Positional measurements of the condylar | ||||||
| Difference of condylar process anteroposterior position (mm) | 0.22 ± 2.09 | − 0.76, 1.20 | 0.96 ± 3.46 | − 0.66, 2.58 | − 0.819 | 0.418 |
| Difference of condylar process vertical position (mm) | 0.44 ± 1.25 | − 0.14,1.02 | 0.17 ± 2.17 | − 0.85, 1.18 | 0.491 | 0.626 |
| Difference of condylar process transverse position (mm) | 0.13 ± 1.35 | − 0.50, 0.76 | 0.13 ± 2.20 | − 0.90, 1.16 | − 0.006 | 0.995 |
| Difference of condylar process angle (°) | 2.22 ± 4.59 | 0.07, 4.36 | − 2.09 ± 9.43 | − 6.50, 2.32 | 1.836 | 0.077 |
UPCB unilateral posterior crossbite; SD standard deviation; CI confidence interval; CAI condylar asymmetry index; RAI ramal asymmetry index; CRAI condylar-plus-ramal asymmetry index
Statistically significant when *(P < 0.05)
Table 6
Inter-group comparisons of Dentoalveolar variables between the control group and UPCB group
| Control group | UPCB group | |||||
|---|---|---|---|---|---|---|
| Mean ± SD | 95% CI | Mean ± SD | 95% CI | t value | P value | |
| Linear measurements | ||||||
| Maxillary transverse width differences—premolar | ||||||
| Premolar (mm) | − 1.03 ± 2.55 | − 1.10, − 2.22 | 2.21 ± 2.53 | 1.03, 3.40 | − 4.307 | 0.000* |
| Buccal alveolar crest (mm) | − 0.25 ± 2.40 | − 1.37, 0.88 | 1.13 ± 1.84 | 0.26, 1.99 | − 2.026 | 0.050 |
| Buccal midalveolar (mm) | − 0.04 ± 2.07 | − 1.00, 0.93 | 0.18 ± 1.59 | − 0.57, 0.93 | − 0.368 | 0.715 |
| Palatal alveolar crest (mm) | − 0.28 ± 2.36 | − 1.38, 0.83 | 1.17 ± 2.13 | 0.17, 2.16 | − 2.023 | 0.050 |
| Palatal midalveolar (mm) | − 0.62 ± 2.25 | − 1.67, 0.44 | − 0.74 ± 1.92 | − 1.64, 0.16 | 0.189 | 0.851 |
| Maxillary transverse width differences—molar | ||||||
| Molar (mm) | − 0.80 ± 1.99 | − 1.73, 0.14 | 3.16 ± 2.85 | 1.82, 4.49 | − 5.082 | 0.000* |
| Buccal alveolar crest (mm) | − 0.55 ± 1.85 | − 1.41, 1.85 | 0.76 ± 3.52 | − 0.89, 2.41 | − 1.467 | 0.151 |
| Buccal midalveolar (mm) | − 0.27 ± 1.75 | − 1.09, 0.55 | − 0.11 ± 3.02 | − 1.52, 1.31 | − 0.211 | 0.834 |
| Palatal alveolar crest (mm) | − 0.70 ± 1.72 | − 1.50, 0.11 | 1.45 ± 2.48 | 0.28, 2.48 | − 3.172 | 0.003* |
| Palatal midalveolar (mm) | − 0.38 ± 1.90 | − 1.27, 0.52 | 0.66 ± 2.28 | − 0.41, 1.73 | − 1.559 | 0.127 |
| Mandibular transverse width differences—premolar | ||||||
| Premolar (mm) | − 1.27 ± 2.47 | − 2.43, − 0.12 | 7.77 ± 3.56 | 6.10, 9.43 | − 9.334 | 0.000* |
| Buccal alveolar crest (mm) | − 0.77 ± 2.55 | − 1.96, 0.43 | 8.22 ± 2.77 | 6.92, 9.51 | − 10.667 | 0.000* |
| Buccal midalveolar (mm) | − 1.28 ± 3.07 | − 2.71, 0.16 | 8.32 ± 3.48 | 6.69, 9.95 | − 9.247 | 0.000* |
| Lingual alveolar crest (mm) | − 1.06 ± 2.81 | − 2.37, 0.26 | 7.51 ± 4.99 | 5.17, 9.85 | − 6.687 | 0.000* |
| Lingual midalveolar (mm) | − 1.18 ± 3.62 | − 2.87, 0.52 | 9.46 ± 4.53 | 7.34, 11.57 | − 8.198 | 0.000* |
| Mandibular transverse width differences—molar | ||||||
| Molar (mm) | − 1.43 ± 1.89 | − 2.31, − 0.54 | 6.42 ± 2.30 | 5.34, 7.49 | − 11.785 | 0.000* |
| Buccal alveolar crest (mm) | − 1.17 ± 2.15 | − 2.17, − 0.17 | 7.72 ± 2.57 | 6.52, 8.92 | − 11.876 | 0.000* |
| Buccal midalveolar (mm) | − 1.59 ± 2.28 | − 2.87, − 0.30 | 8.44 ± 3.17 | 6.95, 9.92 | − 10.691 | 0.000* |
| Lingual alveolar crest (mm) | − 1.25 ± 2.28 | − 2.31, − 0.18 | 8.40 ± 2.23 | 7.36, 9.44 | − 13.553 | 0.000* |
| Lingual midalveolar (mm) | − 1.02 ± 2.64 | − 2.25, 0.22 | 9.76 ± 2.78 | 8.46, 11.06 | − 12.554 | 0.000* |
| Angular measurements | ||||||
| Maxillary teeth inclination differences (°) | ||||||
| Premolar (°) | − 1.12 ± 4.39 | − 3.17, 0.94 | 5.37 ± 7.35 | 1.93, 8.80 | − 3.385 | 0.002* |
| Molar (°) | − 3.74 ± 4.90 | − 6.03, − 1.44 | 9.10 ± 9.92 | 4.46, 13.75 | − 5.189 | 0.000* |
| Mandibular teeth inclination differences (°) | ||||||
| Premolar (°) | 1.57 ± 5.84 | − 1.17, 4.30 | − 10.06 ± 6.90 | − 13.28, − 6.83 | 5.748 | 0.000* |
| Molar (°) | 0.48 ± 6.66 | − 2.63, 3.59 | − 8.18 ± 8.05 | − 11.94, − 4.41 | 3.707 | 0.001* |
UPCB unilateral posterior crossbite; SD standard deviation; CI confidence interval
Statistically significant when *(P < 0.05)
Discussion
We measured the skeletal and dentoalveolar variables of subjects with normal occlusion and growth to establish baselines so that the amount of modification in skeletal Class I UPCB adults can be compared. Young adults aged between 18 and 40 were included in the present study to avoid the influence of potential growth. To exclude UPCB resulting from unilateral condylar hyperplasia, only skeletal Class I adults with continuous condylar cortical bone were included in the present study [23]. We do not specifically include the examination of functional shift into the sample selection criteria because, (1) as mentioned earlier, the functional shift is hardly detected in adults with UPCB due to progressive musculoskeletal adaptation; (2) we were not able to carry out physical examinations on each adult patient because the CBCT scans obtained were not limited to orthodontic patients only.
It had been reported that facial asymmetry is a naturally occurring phenomenon [24]. The present results showed minor asymmetries in the control group, dentoskeletal asymmetries with linear changes were observed at most 4 mm, and angular differences of at most 2°. Consistent with Veli et al. [22], our result suggested that in skeletal side comparisons, only mandibular corpus length received the statistically significant difference in the control group. These suggested that the transverse dental asymmetry in the control group may be the result of camouflaging skeletal deficiency, to maintain a Class I relationship. Patients with no perceivable facial asymmetry were included in the current study as a control group. Thus, we attribute these differences to the asymmetry in nature.
We observed UPCB adults with normal maxillary (J-J) and mandibular (Ag–Ag) skeletal widths and showed more asymmetry in the mandible compared to the control group, mainly in the measurement of the antegonial width (Ag-MSP) and the corpus length. We indicate the increase in antegonial width (Ag-MSP) on the crossbite side was due to the difference in mandibular corpus length. Alongside the corpus length difference, menton was shown to be displaced toward the side of the shorter corpus length. Since the critical distance of menton deviations that differentiates facial symmetry from asymmetry is approximately 4 mm [25, 26], we considered the subjects in the control group (− 0.49 ± 2.54 mm) to be symmetric but not for the UPCB group (3.18 ± 5.01 mm) due to large standard deviations.
The RH and CH + RH values were significantly shorter on the crossbite side than on the non-crossbite side in UPCB group while there was no side difference in control group. The decrease in RH and CH + RH on the crossbite side was consistent with the studies of kilic [28]. These differences might be because of the restriction in mandibular growth due to forced occlusion [5], adaptive chewing pattern [8], or impaired functional activity of the masticatory muscles [27]. According to Habets et al. [19], the asymmetric index value greater than 3% could be considered mandibular vertical asymmetry. In our study, apart from the CRAI in the control group, both control and UPCB groups’ asymmetric indexes were higher than the 3% threshold, and intergroup comparisons were not statistically significant. Some authors [10, 28] explained that the high CAI values as a result of mandibular shift due to occlusal change and TMJ remodeling, and the differences in the measurement methods might also be a reason. Our study was compared with Halicioglu et al [29], as they used the same radiographic assessment as we did. Consistent with our results, they found no statistically significant differences in CAI, RAI, and CRAI values among the control and UPCB groups.
Additionally, assessments of condylar positional asymmetries showed no significant differences in both groups. We inferred these negative findings to the variability of condylar position based on the large standard deviation observed. Few studies [30, 31] investigated the true skeletal asymmetry and found that condylar asymmetry was influenced by the condylar morphology, coronoid process, and the glenoid fossa. Changes in dimension or bony deposition on these structures were a sign of adaptation to form a better occlusion.
Corroborating with the previous belief [7], the present study showed that UPCB adults displayed more transverse asymmetry than normal occlusion adults on dentoalveolar variables, predominately in the mandible. The increases in widths of maxillary premolar, molar, and palatal alveolar crest were statistically significant and were consistent with the greater buccal inclinations of the respective maxillary teeth on the crossbite side. In the mandible, an increase in the alveolar width was observed on the crossbite side with lingually inclined posterior teeth. We explained these phenomena as a compensation of the alveolar bone to the degree of malocclusion or vice versa. Also, significant transverse deviation in UPCB group on the mandibular posterior region might be due to a mandibular functional shift, dentoalveolar or skeletal asymmetry, or a combination of these factors. As the present study observed no condylar positional asymmetry, the mandibular displacement caused by asymmetric corpus length shown in our results might contribute to the unilateral posterior crossbite in adult patients, and the posterior teeth on both arches showed compensations to overcome these skeletal discrepancies. Our findings provide some guidance in the clinical practice (1) improvement of facial asymmetry is difficult to achieve simply by orthodontic treatment in UPCB adults; (2) asymmetry treatment modalities, such as asymmetric maxillary expansion, should be considered for the treatment of adults with UPCB, especially when maxillary posterior teeth on both sides displayed compensations in opposite direction; (3) early intervention of UPCB is crucial for the prevention of skeletal asymmetry.
The limitations of this study are the small sample size and deficiency in the assessment of potential functional shift. Most of the variables measured in this study appeared with a relatively large 95% CI, we contributed this phenomenon to the limitation of sample size and the complexity of multiple anatomical interactions of craniofacial structures. The data collection and measurements were made by one author, and all the variables measured in crossbite groups were compared to the control group to reduce variability to overcome the limitation in the sample size. The present study focused on the three-dimensional linear and angular measurements of maxillomandibular skeletal and transverse dentoalveolar asymmetries in UPCB adults. To further investigate their dentoskeletal adaption patterns, alveolar bone height together with volumetric and surface measurements of the TMJ complex and other craniofacial structures can also be performed in future studies.
Conclusions
- Adults with UPCB showed significant asymmetry in dentoskeletal measurements in the transverse dimension.
- No significant asymmetry was found in the condylar position and the maxillomandibular height in UPCB group when compared to the control group.
- Mandibular corpus length asymmetry and menton deviation were observed in both groups, with UPCB adults showing greater deviations.
- In UPCB group, the maxillary posterior teeth were more buccally inclined, and mandibular posterior teeth were lingually inclined on the crossbite side. Mandibular posterior teeth were more upright to accommodate the lingually inclined maxillary posterior teeth on the non-crossbite side.
Acknowledgements
Not applicable.
Abbreviations
| UPCB | Unilateral posterior crossbite |
| CBCT | Cone-beam computed tomography |
| UPCB | Unilateral posterior crossbite |
| 2D | Two-dimensional |
| 3D | Three-dimensional |
| DICOM | Digital Imaging and Communications in Medicine |
| FH plane | Frankfort horizontal plane |
| MSP | Midsagittal plane |
| Op | Opisthion |
| J | Jugal process |
| Ag | Antegonial |
| J–J | Total width of the maxilla |
| Ag–Ag | Total width of the mandible |
| (J-J) − (Ag–Ag) | Maxillomandibular width difference |
| Me | Menton |
| Gopost | Gonion posterius |
| CH | Condylar height |
| RH | Ramal height |
| CH + RH | Condylar plus ramal height |
| CAI | Condylar asymmetry index |
| RAI | Ramal asymmetry index |
| CRAI | Condylar-plus-ramal asymmetry index |
| GC | Geometric center |
| ICC | Intraclass correlation coefficient |
Author contributions
JWW and JBSY. contributed equally by collecting the sample, collaborating with the statistical analysis, interpreting the data, and writing the manuscript. MQL contributed to the study conception and design. HX helped with the statistical analysis and modify the manuscript. YMW helped modify the manuscript. XLH designed the study, made a critical revision of the manuscript, and was the corresponding author. All authors read and approved the final manuscript.
Funding
This research was funded by the Natural Science Foundation of China (NSFC), grant number: 81870803.
Availability of data and materials
The datasets used and/or analyzed during the current study are available from the corresponding authors upon reasonable request.
Declarations
This study was approved by the Institutional Review Board of West China School of Stomatology (ethical number: WCHSIRB-D-2018-131). Because this study was retrospective and personally identifiable information was not included, informed consent was waived by the Institutional Review Board of West China School of Stomatology. All methods were carried out in accordance with relevant guidelines and regulations, and the Declaration of Helsinki.
Not applicable.
The authors declare that they have no competing interests.
Footnotes
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Jingwen Wu and Joanna Bek Ser Yun have contributed equally to this work